Multicomponent Polymer Systems: Phase Behavior, Dynamics and Applications : November 29-December 3, 2004, Boston, Massachusetts, USA. |
From inside the book
Results 1-3 of 8
Page 103
... pore structure of the films was affected by many factors such as composition of the blend , molecular weight , and various processing parameters . The formation of nanometer size pores was mainly due to the fast phase separation process ...
... pore structure of the films was affected by many factors such as composition of the blend , molecular weight , and various processing parameters . The formation of nanometer size pores was mainly due to the fast phase separation process ...
Page 105
... Pores Film Surfaces Fig . 1. SEM micrograph of cross - section of a porous PEI film made from a 7 % PCLD / PEI blend . Pore size is one of the important parameters that describe the pore structure . In our method , the pores were ...
... Pores Film Surfaces Fig . 1. SEM micrograph of cross - section of a porous PEI film made from a 7 % PCLD / PEI blend . Pore size is one of the important parameters that describe the pore structure . In our method , the pores were ...
Page 107
... pore size increased with increasing PCLD content ( see Figure 4 ) . This is probably due to the increasing ... Pore Size Distribution 5 % 7 % 10 % 0.01 0.008 0.006 0.004 0.002 0 0 50 100 150 200 250 300 350 Pore Size ( nm ) 12 % Fig . 3 ...
... pore size increased with increasing PCLD content ( see Figure 4 ) . This is probably due to the increasing ... Pore Size Distribution 5 % 7 % 10 % 0.01 0.008 0.006 0.004 0.002 0 0 50 100 150 200 250 300 350 Pore Size ( nm ) 12 % Fig . 3 ...
Contents
Rich Dynamics in Diblock Copolymers | 1 |
On the Origin of Color Degradation in Polyfluorenes Block Copolymer | 14 |
Influence of the Particle Morphology on the MicroAnd Macromechanics | 30 |
Copyright | |
2 other sections not shown
Common terms and phrases
2005 Materials Research amorphous annealing behavior block copolymers chain Chem cluster co-continuous component composite electrodes conductivity counterion crystalline decrease diffusion dynamic mechanical analysis dynamics E-MA-GMA effect emission endothermic epoxide ESC resistance experimental extruded fiber length fibrous clay filler films flexural modulus fluid glass transition glass transition temperature HDPE homopolymer Im3m immiscible increases initiator intensity interactions interfacial ionomer irradiated layer liquid crystal Macromolecules Materials Research Society matrix measurements mechanical properties melt melt-blended composite membranes molecular weight monomers morphology Nafion nanocomposites nanoparticles nanorods NTDA-ODADS/ODA observed obtained P(VDF-TrFE parameters particles PCLD peak performance PFOS phase separation Phys platelet PMDA PMMA polarization polydisperse polyimide polyimide copolymers polymer blends polymerization polystyrene pore PS/PP Raman ratio room temperature samples SAXS shown in Figure shows simulation solvent spectra spheres strain structure surface SWNT TFPS(II TFPSF thermal volume fraction X-ray