Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, 1991: Presented at the 10th International Conference on Offshore Mechanics and Arctic Engineering, Stavanger, Norway, June 23-28, 1991. Materials engineering, Volume 3Mamdouh M. Salama American Society of Mechanical Engineers, 1991 - 323 pages |
From inside the book
Results 1-3 of 54
Page 444
... crack front points were selected to develop the K expression of Equation ( 3 ) to result in a total of six empirical ... depth for the joint under the brace axial tension ( AKA1 ) are presented in Figure 9a . There are two contradicting ...
... crack front points were selected to develop the K expression of Equation ( 3 ) to result in a total of six empirical ... depth for the joint under the brace axial tension ( AKA1 ) are presented in Figure 9a . There are two contradicting ...
Page 518
... CRACK DEPTH , a ( IN . ) CRACK HALF - LENGTH , Z ( IN . ) CRACK DEPTH , o ( IN . ) 0.3 0 10 1.4 1.2 CRACK HALF - LENGTH , C ( IN . ) 1.0 0.8 0.6 0.4 0.2 500 ° CRACK HALF - LENGTH , C ( IN . ) FRACTURE MECHANICS FATIGUE LIFE ANALYSIS OF ...
... CRACK DEPTH , a ( IN . ) CRACK HALF - LENGTH , Z ( IN . ) CRACK DEPTH , o ( IN . ) 0.3 0 10 1.4 1.2 CRACK HALF - LENGTH , C ( IN . ) 1.0 0.8 0.6 0.4 0.2 500 ° CRACK HALF - LENGTH , C ( IN . ) FRACTURE MECHANICS FATIGUE LIFE ANALYSIS OF ...
Page 522
... crack tip . This formula is not applicable to the present cracked joint ... depth to plate width ratios . a / b CT / SENT 0.1 0.2 0.3 0.5 0.40 0.39 0.38 ... crack depth makes the plastic collapse load conservative further . The material ...
... crack tip . This formula is not applicable to the present cracked joint ... depth to plate width ratios . a / b CT / SENT 0.1 0.2 0.3 0.5 0.40 0.39 0.38 ... crack depth makes the plastic collapse load conservative further . The material ...
Contents
THICKNESS EFFECT | 305 |
OFFSHORE TECHNOLOGY PART | 315 |
Influence of the Welding Procedure on the Ferrite Content and Fracture Toughness of Duplex | 323 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
A36 steel as-welded joints assessment Basic behaviour bending brace calculated cathodic protection chord comparison composite computed corrosion fatigue crack depth crack front crack growth rate crack initiation crack length crack propagation crack tip cruciform joints defect diameter Dover failure fatigue crack growth fatigue life predictions fatigue strength fatigue test Figure finite element finite element analysis fracture mechanics geometry impact improved increasing integration layer method Nominal Stress number of cycles Offshore Mechanics offshore structures OMAE parameters parametric equations performed plastic plate thickness procedure ratio residual stress root S-N curves saddle seawater short cracks shown SIF solutions specimens strain strain gauge strand stress concentration stress concentration factors stress distribution stress intensity factor stress range surface crack T-joints Table technique Tee joints temperature tendon tensile tension tubular joints values variable amplitude Volume III-B weight function weld profile weld toe Welded Joints weldments wire