## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 1-2American Society of Mechanical Engineers, 1991 - Arctic regions |

### From inside the book

Results 1-3 of 79

Page 34

The resulting two equations for each least - squares method are then solved to obtain the CD , Cm

The resulting two equations for each least - squares method are then solved to obtain the CD , Cm

**values**-1.5 0 1.571 3.141 4.712 6.283 T A measure of the success of a calculation procedure is the**value**of the integral of the absolute ...Page 35

15 nonsinusoidal -sinusoidal 10 5 50 -5 -10 -15 Table 1 contains

15 nonsinusoidal -sinusoidal 10 5 50 -5 -10 -15 Table 1 contains

**values**of the**values**of the various force coefficient presented to represent the calculation procedure . The maximum**values**of the force coefficients agree remarkably well ...Page 509

However , in the case of the tethers of TLP's or rigid risers , numerical

However , in the case of the tethers of TLP's or rigid risers , numerical

**values**of d and q can be very large up to 300 for 8 and 150 for q . It is therefore necessary to obtain the Mathieu stability chart for these large parameters .### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

CONTENTS | 131 |

High Frequency Hydrodynamic Damping of a TLP | 147 |

A Comparison of Results | 153 |

Copyright | |

50 other sections not shown

### Other editions - View all

### Common terms and phrases

acceleration added amplitude analysis angle applied approach approximately assumed body boundary cable calculated coefficients compared components computed considered constant coordinate corresponding cylinder damping depth determined developed diffraction direction displacement distribution domain drag drift dynamic effect element Engineering equation estimated experimental experiments expressed field Figure floating flow fluid force free surface frequency function given height hydrodynamic included increase integral length lift force linear load mass maximum mean measured Mechanics method mode mooring motion natural nonlinear obtained Offshore operation oscillation period phase pile platform position potential predicted present pressure problem production range ratio relative represents respectively response second-order separation ship shown shows simulation solution stiffness structure surface surge Table Technology tension tests theory values velocity vertical vessel wave