Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 1; Volume 7, Part 1American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 78
Page 190
... areas north of the Aleutian Islands are Zone 3 and areas to the south are Zone 5. Assuming the soils in these offshore areas are classified as Soil Type C , the corresponding API spectra for Zones 2 , 3 , 4 , and 5 are shown in Fig . 6 ...
... areas north of the Aleutian Islands are Zone 3 and areas to the south are Zone 5. Assuming the soils in these offshore areas are classified as Soil Type C , the corresponding API spectra for Zones 2 , 3 , 4 , and 5 are shown in Fig . 6 ...
Page 262
... areas and volumes are computed from the three - dimensional model for each configuration . Boat landing areas and volumes are lumped at levels +10 to -10 feet . Other areas and volumes are lumped at 20 levels along the height of the ...
... areas and volumes are computed from the three - dimensional model for each configuration . Boat landing areas and volumes are lumped at levels +10 to -10 feet . Other areas and volumes are lumped at 20 levels along the height of the ...
Page 291
... area Only the second mode period was significantly influenced by the leg area . A 25 % change in leg area resulted in a 11 % change in the second mode period . The more leg area , the lower the period . Pile area Only the first mode ...
... area Only the second mode period was significantly influenced by the leg area . A 25 % change in leg area resulted in a 11 % change in the second mode period . The more leg area , the lower the period . Pile area Only the first mode ...
Contents
FLOATING PRODUCTION SYSTEMS | 1 |
Semisubmersible Floating Production for the Gulf of Mexico | 13 |
OFFSHORE MECHANICS | 23 |
Copyright | |
41 other sections not shown
Other editions - View all
Common terms and phrases
adsorber amplitude analysis angle Arctic Engineering axial bending buoy buoyancy cable calculated coefficient compliant tower components Conference on Offshore curve damage diameter displacement drag coefficient drilling dynamic effect energy equation equipment fatigue Figure finite element flexible floating production flow function horizontal hydrodynamic installation jacket kips length linear load marine mass matrix maximum measured Mechanics and Arctic method mode mode shapes model tests modulus mooring line mooring system motion natural frequency nonlinear obtained Offshore Mechanics Offshore Technology Conference operation parameters performance pile pipe pipe materials pipeline platform polyester pressure production riser random wave ratio response rope rotation RPIT shear shear modulus shear strength shown in Fig simulation soil static stiffness strength stress structure subsea surface syntactic foam turbine uranium vane velocity vertical vessel water depth wave forces wave height wave power weight wellhead wire