## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 1; Volume 7, Part 1American Society of Mechanical Engineers, 1988 - Arctic regions |

### From inside the book

Results 1-3 of 78

Page 143

It will be noted that as tooth fillet radius increases , the SCF decreases for a

It will be noted that as tooth fillet radius increases , the SCF decreases for a

**given**ratio of axial load to tooth load . This result is not as obvious as it may first appear since increasing the tooth fillet radius increases the tooth ...Page 308

ESTIMATION OF DAMPING AND STIFFNESS MATRICES In this section , we will show that the damping matrix , C , and the stiffness matrix , K , can readily be extracted from a

ESTIMATION OF DAMPING AND STIFFNESS MATRICES In this section , we will show that the damping matrix , C , and the stiffness matrix , K , can readily be extracted from a

**given**set of identified complex modes , provided that the mass ...Page 379

This be vizualized as a travelling wave inside eryelope

This be vizualized as a travelling wave inside eryelope

**given**by the product of the sine term and x Using finite number of terms , the 3 matrices M , Ç and K may now be generated and the eigenvalues determined by standard methods .### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

FLOATING PRODUCTION SYSTEMS | 1 |

OFFSHORE MECHANICS | 23 |

Early Production Systems in the North | 31 |

Copyright | |

34 other sections not shown

### Other editions - View all

### Common terms and phrases

analysis angle applied axial bending cable calculated characteristics coefficient components Conference connected considered construction cost curve damage depth determined diameter direction displacement distribution dynamic effect element energy Engineering equation equipment fatigue field Figure flexible flow forces frequency function geometry given important included increase installation International joint length limit linear load lower mass material matrix maximum mean measured Mechanics method mode mooring motion natural normal obtained Offshore operation parameters performance period pile pipe pipeline platform position presented pressure problem production range ratio response riser shear shown shows significant soil static stiffness strength stress structure surface Table Technology tension tower turbine unit vane vessel wave weight wire