Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 278
7 . strength is not critical , the Grade 2 alloy is most often chosen based on its low cost , high commercial availability , fabricability , and practical strength / ductility properties . This alloy is comparable to common austenitic ...
7 . strength is not critical , the Grade 2 alloy is most often chosen based on its low cost , high commercial availability , fabricability , and practical strength / ductility properties . This alloy is comparable to common austenitic ...
Page 281
Fabricability / Weldability With the exception of the Grade 5 alloy , all Table 1 alloys can be cut , cold / warm formed , and machined using the same equipment and basic techniques employed for common steels .
Fabricability / Weldability With the exception of the Grade 5 alloy , all Table 1 alloys can be cut , cold / warm formed , and machined using the same equipment and basic techniques employed for common steels .
Page 67
-60H 5878 -100 0.15 0.25 0.20 PCM , % As utilizing of ICR process and OLAC process can produce higher strength steel plate with lower alloying containing steel , the X80 grade UOE pipes can be manufactured with equal to or lower carbon ...
-60H 5878 -100 0.15 0.25 0.20 PCM , % As utilizing of ICR process and OLAC process can produce higher strength steel plate with lower alloying containing steel , the X80 grade UOE pipes can be manufactured with equal to or lower carbon ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
WELD METAL AND HAZ PROPERTIES | 37 |
Copyright | |
48 other sections not shown
Other editions - View all
Common terms and phrases
alloys aluminium analysis application axial base bending calculated CGHAZ coating compared components composition connection considered constant cooling corrosion cost crack critical CTOD curves cycle depth developed distribution effect element energy Engineering evaluation experimental experiments factor fatigue field Figure fracture geometry given Grade grain hardness heat higher improved increase indicated initiation length living load lower material measured mechanical metal method microstructure notched observed obtained offshore operation parameters pass performed pipe plate position possible prediction present pressure procedure production properties range reduced region residual stress resistance root seawater shown shows simulation specimens steel strain strength structure surface Table technique temperature tensile thermal thickness Titanium toughness values weld metal welded joints wire yield zone
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1991 |
| Export Citation | BiBTeX EndNote RefMan |