Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 94
As material input data true stress true strain curves of the base material , the weld metals , the fine grained HAZ and the coarse grained HAZ were used , where the true o - e - curves for the HAZ were obtained from weld simulated ...
As material input data true stress true strain curves of the base material , the weld metals , the fine grained HAZ and the coarse grained HAZ were used , where the true o - e - curves for the HAZ were obtained from weld simulated ...
Page 343
4a Crack initiation lives of joints with constant t = 26 mm compared with S - N curves for joints with t / T = 1 ; 45 ° welds . 10 1.0E - 04 1.0E + 06 1.0E06 1.0E07 Cycles Fig . 4b Total lives of joints with constant t = 26 mm compared ...
4a Crack initiation lives of joints with constant t = 26 mm compared with S - N curves for joints with t / T = 1 ; 45 ° welds . 10 1.0E - 04 1.0E + 06 1.0E06 1.0E07 Cycles Fig . 4b Total lives of joints with constant t = 26 mm compared ...
Page 102
is The AWS - X curve 3472 in Figure 1 . compared with S - N curves from NS Uncertainties related to pipe strength against fatigue failure are discussed in the following on the basis of a state of the art review .
is The AWS - X curve 3472 in Figure 1 . compared with S - N curves from NS Uncertainties related to pipe strength against fatigue failure are discussed in the following on the basis of a state of the art review .
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
WELD METAL AND HAZ PROPERTIES | 37 |
Copyright | |
48 other sections not shown
Other editions - View all
Common terms and phrases
alloys aluminium analysis application axial base bending calculated CGHAZ coating compared components composition connection considered constant cooling corrosion cost crack critical CTOD curves cycle depth developed distribution effect element energy Engineering evaluation experimental experiments factor fatigue field Figure fracture geometry given Grade grain hardness heat higher improved increase indicated initiation length living load lower material measured mechanical metal method microstructure notched observed obtained offshore operation parameters pass performed pipe plate position possible prediction present pressure procedure production properties range reduced region residual stress resistance root seawater shown shows simulation specimens steel strain strength structure surface Table technique temperature tensile thermal thickness Titanium toughness values weld metal welded joints wire yield zone
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1991 |
| Export Citation | BiBTeX EndNote RefMan |