Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 94
Page 312
Fatigue Strength for Nf ( MPa ) 400 200- 200 ( a ) N1 = 105 100 50 ( b ) N = 2-106 DEN F - Curve O -Case 1-1 Δ --- Case 1-2 ( C1 ) ᄆ --Case 1-3 X Case 1-4 DEN F - Curve Fatigue Strength for N ( MPa ) 400 200- A A 0 200 ( a ) Nf = 105 Δ ...
Fatigue Strength for Nf ( MPa ) 400 200- 200 ( a ) N1 = 105 100 50 ( b ) N = 2-106 DEN F - Curve O -Case 1-1 Δ --- Case 1-2 ( C1 ) ᄆ --Case 1-3 X Case 1-4 DEN F - Curve Fatigue Strength for N ( MPa ) 400 200- A A 0 200 ( a ) Nf = 105 Δ ...
Page 323
THE EFFECT OF THE SIZE OF WELDMENTS ON THEIR FATIGUE STRENGTH F. V. Lawrence College of Engineering University of ... fatigue resistance was used to investigate the influence of thickness ( weldment size ) on the fatigue life of ...
THE EFFECT OF THE SIZE OF WELDMENTS ON THEIR FATIGUE STRENGTH F. V. Lawrence College of Engineering University of ... fatigue resistance was used to investigate the influence of thickness ( weldment size ) on the fatigue life of ...
Page 349
... Fatigue life inversely proportional to thickness with a more severe trend than predicted by Eqns . 1 and 3 . A. Fatigue life greater than for comparable investigations . This was ... FATIGUE STRENGTH 2.0 1.8 229 1.6 Booth , plote 349.
... Fatigue life inversely proportional to thickness with a more severe trend than predicted by Eqns . 1 and 3 . A. Fatigue life greater than for comparable investigations . This was ... FATIGUE STRENGTH 2.0 1.8 229 1.6 Booth , plote 349.
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
Prediction of Residual Stresses and Distortions in Welded Structures | 25 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
aluminium amplitude analysis as-welded austenite axial bending calculated CGHAZ Charpy chemical composition coating components cooling corrosion crack front crack tip CTOD CTOD fracture toughness CTOD test CTOD value curves developed diameter distribution evaluation experimental factor fatigue crack fatigue strength ferrite Figure fracture mechanics fracture toughness gauges geometry Grade grain groove Gullfaks heat input ICCGHAZ increase kJ/mm living quarter load martensite Materials Engineering ASME measured mechanical properties method microstructure multi-pass narrow gap offshore structures OMAE parameters pearlite pipe plate thickness Pop-in prediction pressure PWHT residual stress riser S-N curves seawater shown simulation slot Statoil steel plate strain gauges stress concentration stress range surface notched Table tapered joint temperature tensile thickness effect titanium alloys TMCP tubular underwater welding weld metal weld toe welded joints Welding Institute welding procedure welding process welding residual stress weldments wire yield strength zone