Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 65
Page 583
... pressure pump was connected . The pressure in the loop was read on manometers at the pump and at the blind flange , position 18 . The pipes in the loop were all of class PN 16 , so the working pressure , 16 bar , was first kept for 5 ...
... pressure pump was connected . The pressure in the loop was read on manometers at the pump and at the blind flange , position 18 . The pipes in the loop were all of class PN 16 , so the working pressure , 16 bar , was first kept for 5 ...
Page 608
3 ) just submerged at atmospheric pressure ( ≈ 0.1 MPa ) ; 4 ) 0.1 MPa = submerged under atmospheric pressure ; 10.0 MPa = submerged under 1000 m water pressure . synthetic seawater composition according to ASTM D1141-75 . 5 ) 2 . The ...
3 ) just submerged at atmospheric pressure ( ≈ 0.1 MPa ) ; 4 ) 0.1 MPa = submerged under atmospheric pressure ; 10.0 MPa = submerged under 1000 m water pressure . synthetic seawater composition according to ASTM D1141-75 . 5 ) 2 . The ...
Page 190
... pressure for different thickness of ice layer is directly related to the local ice temperature . Since there exists a relationship between ice temperature and air temperature , hence it is possible to obtain a method by which the ...
... pressure for different thickness of ice layer is directly related to the local ice temperature . Since there exists a relationship between ice temperature and air temperature , hence it is possible to obtain a method by which the ...
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
Prediction of Residual Stresses and Distortions in Welded Structures | 25 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
aluminium amplitude analysis as-welded austenite axial bending calculated CGHAZ Charpy chemical composition coating components cooling corrosion crack front crack tip CTOD CTOD fracture toughness CTOD test CTOD value curves developed diameter distribution evaluation experimental factor fatigue crack fatigue strength ferrite Figure fracture mechanics fracture toughness gauges geometry Grade grain groove Gullfaks heat input ICCGHAZ increase kJ/mm living quarter load martensite Materials Engineering ASME measured mechanical properties method microstructure multi-pass narrow gap offshore structures OMAE parameters pearlite pipe plate thickness Pop-in prediction pressure PWHT residual stress riser S-N curves seawater shown simulation slot Statoil steel plate strain gauges stress concentration stress range surface notched Table tapered joint temperature tensile thickness effect titanium alloys TMCP tubular underwater welding weld metal weld toe welded joints Welding Institute welding procedure welding process welding residual stress weldments wire yield strength zone