Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 63
Page 583
Through a small outlet in position 7 , a feeder hose from an adjustable constant pressure pump was connected . The pressure in the loop was read on manometers at the pump and at the blind flange , position 18 .
Through a small outlet in position 7 , a feeder hose from an adjustable constant pressure pump was connected . The pressure in the loop was read on manometers at the pump and at the blind flange , position 18 .
Page 608
3 ) just submerged at atmospheric pressure ( = 0.1 MPa ) ; . ) 0.1 MPa submerged under atmospheric pressure ; 10.0 MPa submerged under 1000 m water pressure . synthetic seawater composition according to ASTM D1141-75 . Table 2.
3 ) just submerged at atmospheric pressure ( = 0.1 MPa ) ; . ) 0.1 MPa submerged under atmospheric pressure ; 10.0 MPa submerged under 1000 m water pressure . synthetic seawater composition according to ASTM D1141-75 . Table 2.
Page 190
The result of experiment also confirmed that the expanding pressure for different thickness of ice layer is directly related to the local ice temperature . Since there exists a relationship between ice temperature and air temperature ...
The result of experiment also confirmed that the expanding pressure for different thickness of ice layer is directly related to the local ice temperature . Since there exists a relationship between ice temperature and air temperature ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
WELD METAL AND HAZ PROPERTIES | 37 |
Copyright | |
48 other sections not shown
Other editions - View all
Common terms and phrases
alloys aluminium analysis application axial base bending calculated CGHAZ coating compared components composition connection considered constant cooling corrosion cost crack critical CTOD curves cycle depth developed distribution effect element energy Engineering evaluation experimental experiments factor fatigue field Figure fracture geometry given Grade grain hardness heat higher improved increase indicated initiation length living load lower material measured mechanical metal method microstructure notched observed obtained offshore operation parameters pass performed pipe plate position possible prediction present pressure procedure production properties range reduced region residual stress resistance root seawater shown shows simulation specimens steel strain strength structure surface Table technique temperature tensile thermal thickness Titanium toughness values weld metal welded joints wire yield zone
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1991 |
| Export Citation | BiBTeX EndNote RefMan |