Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volumes 3-5American Society of Mechanical Engineers, 1991 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 50
... Simulation Specimens of 11mm square cross section were used for the simulations . The steel 1 specimens were subjected to varying thermal cycles , detailed in Table 2 , in order to control the grain size , the nature and proportion of ...
... Simulation Specimens of 11mm square cross section were used for the simulations . The steel 1 specimens were subjected to varying thermal cycles , detailed in Table 2 , in order to control the grain size , the nature and proportion of ...
Page 52
... simulation A ; b ) Steel 1 , simulation D ; 0.1 0 -100 -80 ( d ) -60 -40 1 -20 0 20 40 -100 -80 -60 ( e ) Test temperature , ° C Toughness Testing The CTOD transition curves for simulations A , D , E and F in steel 1 , and simulation A ...
... simulation A ; b ) Steel 1 , simulation D ; 0.1 0 -100 -80 ( d ) -60 -40 1 -20 0 20 40 -100 -80 -60 ( e ) Test temperature , ° C Toughness Testing The CTOD transition curves for simulations A , D , E and F in steel 1 , and simulation A ...
Page 33
... simulation and force computations are correct , then with a 95 percent probability , the 100 - year force would be smaller than the 84th largest annual force and bigger than the 200th largest annual force in a 10,000 - year simulation ...
... simulation and force computations are correct , then with a 95 percent probability , the 100 - year force would be smaller than the 84th largest annual force and bigger than the 200th largest annual force in a 10,000 - year simulation ...
Contents
RESIDUAL STRESS AND DISTORTION IN WELDS | 1 |
Measurement and Prediction of Welding Residual Stresses Using | 7 |
Prediction of Residual Stresses and Distortions in Welded Structures | 25 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
aluminium amplitude analysis as-welded austenite axial bending calculated CGHAZ Charpy chemical composition coating components cooling corrosion crack front crack tip CTOD CTOD fracture toughness CTOD test CTOD value curves developed diameter distribution evaluation experimental factor fatigue crack fatigue strength ferrite Figure fracture mechanics fracture toughness gauges geometry Grade grain groove Gullfaks heat input ICCGHAZ increase kJ/mm living quarter load martensite Materials Engineering ASME measured mechanical properties method microstructure multi-pass narrow gap offshore structures OMAE parameters pearlite pipe plate thickness Pop-in prediction pressure PWHT residual stress riser S-N curves seawater shown simulation slot Statoil steel plate strain gauges stress concentration stress range surface notched Table tapered joint temperature tensile thickness effect titanium alloys TMCP tubular underwater welding weld metal weld toe welded joints Welding Institute welding procedure welding process welding residual stress weldments wire yield strength zone