## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4; Volume 8, Part 4American Society of Mechanical Engineers, 1989 - Arctic regions |

### From inside the book

Results 1-3 of 86

Page 7

Here concentrate on the response obtained using flat ended indentors of

intermediate aspect ratio ( in the range 1 to 5 ) as used in the tests

Michel and Toussaint ( 1977 ) and Ponter ( 1989 ) . In particular we examine the ...

Here concentrate on the response obtained using flat ended indentors of

intermediate aspect ratio ( in the range 1 to 5 ) as used in the tests

**described**byMichel and Toussaint ( 1977 ) and Ponter ( 1989 ) . In particular we examine the ...

Page 117

... this simple distribution with depth would not be a sufficient

natural deposits ( Vanmarcke , 1977 ) . ... load distribution would normally be

obtained from a full probabilistic analysis similar to the one

paper ...

... this simple distribution with depth would not be a sufficient

**description**of manynatural deposits ( Vanmarcke , 1977 ) . ... load distribution would normally be

obtained from a full probabilistic analysis similar to the one

**described**in thispaper ...

Page 188

WJw , where û is the unit vector in the direction of - -W . The model

this paper ( see also Jessup , 1988 ) makes use of the full dynamic equations of

motion for all six degrees of freedom ( i.e. , three rotational and three translational

) ...

WJw , where û is the unit vector in the direction of - -W . The model

**described**inthis paper ( see also Jessup , 1988 ) makes use of the full dynamic equations of

motion for all six degrees of freedom ( i.e. , three rotational and three translational

) ...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

OFFSHORE MECHANICS | 1 |

ICE FORCES | 11 |

MATERIALS TECHNOLOGY | 24 |

Copyright | |

22 other sections not shown

### Other editions - View all

### Common terms and phrases

analysis applied approach Arctic assumed average behaviour body calculated coefficient components compression compressive stress computed considered constant crack creep damage deformation dependent depth described determined developed diameter direction distribution effect elastic energy Engineering equation estimate experiments expression factor failure field Figure floe force fracture frequency function given grain grain boundary horizontal ice sheet iceberg impact increase initial International length limit load mass material maximum mean measured Mechanics method microcracks motion normal nucleation observed obtained Offshore operation parameters peak performed plane position predicted present pressure probability range ratio Regions relation relative Research resistance ridge samples sea ice shear ship shown shows simulation specimen strain rate strength stress structure surface Table temperature tensile tensor tests thickness toughness uniaxial vertical wave