## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4; Volume 8, Part 4American Society of Mechanical Engineers, 1989 - Arctic regions |

### From inside the book

Results 1-3 of 72

Page 33

This suggests a D / d ratio of 10 or greater where D and d are sample

and maximum grain

discussed here are .750 inches in

order of ...

This suggests a D / d ratio of 10 or greater where D and d are sample

**diameter**and maximum grain

**diameter**respectively . The samples utilized in the testsdiscussed here are .750 inches in

**diameter**and have grain**diameters**on theorder of ...

Page 277

Due to the symmetry of the problem , the shear stresses i are zero on the loading

two cases : ( 1 ) concentrated load , 0 + 0 , and ( 2 ) load distributed over a finite ...

Due to the symmetry of the problem , the shear stresses i are zero on the loading

**diameter**. The distributions of o , and o . stresses are shown in Figure 2 ( a ) fortwo cases : ( 1 ) concentrated load , 0 + 0 , and ( 2 ) load distributed over a finite ...

Page 296

For a finite size structure , the

denoted by no = 1 ) are evaluated as follows : 8 EXAMPLE DESIGN PROBLEM

The proposed method has been used to determine a design iceberg collision

event ...

For a finite size structure , the

**diameter**and velocity PDF's given a collision (denoted by no = 1 ) are evaluated as follows : 8 EXAMPLE DESIGN PROBLEM

The proposed method has been used to determine a design iceberg collision

event ...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

OFFSHORE MECHANICS | 1 |

ICE FORCES | 11 |

MATERIALS TECHNOLOGY | 24 |

Copyright | |

22 other sections not shown

### Other editions - View all

### Common terms and phrases

analysis applied approach Arctic assumed average behaviour body calculated coefficient components compression compressive stress computed considered constant crack creep damage deformation dependent depth described determined developed diameter direction distribution effect elastic energy Engineering equation estimate experiments expression factor failure field Figure floe force fracture frequency function given grain grain boundary horizontal ice sheet iceberg impact increase initial International length limit load mass material maximum mean measured Mechanics method microcracks motion normal nucleation observed obtained Offshore operation parameters peak performed plane position predicted present pressure probability range ratio Regions relation relative Research resistance ridge samples sea ice shear ship shown shows simulation specimen strain rate strength stress structure surface Table temperature tensile tensor tests thickness toughness uniaxial vertical wave