Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4American Society of Mechanical Engineers, 1993 - Arctic regions |
From inside the book
Results 1-3 of 50
Page 41
... average laser fluence needed to achieve this spallation was 1.52 x 105 J / m2 . The tensile strength corresponding to this threshold laser fluence was determined to be 1.39 GPa from the computer simulation . As before , this corresponds ...
... average laser fluence needed to achieve this spallation was 1.52 x 105 J / m2 . The tensile strength corresponding to this threshold laser fluence was determined to be 1.39 GPa from the computer simulation . As before , this corresponds ...
Page 43
... average tensile strength across the basal planes were relatively insensitive to temperature . Average values of 1.099 GPa , 1.13 GPa and 1.15 GPa were measured at -10 ° C , -30 ° C and -40 ° C , respectively . These values are ...
... average tensile strength across the basal planes were relatively insensitive to temperature . Average values of 1.099 GPa , 1.13 GPa and 1.15 GPa were measured at -10 ° C , -30 ° C and -40 ° C , respectively . These values are ...
Page 77
... average pressure with random variations above and below the average value The auto- and cross - spectral density functions in Figures 2 through 6 are similar in frequency domain but much different in magnitude of the spectral density ...
... average pressure with random variations above and below the average value The auto- and cross - spectral density functions in Figures 2 through 6 are similar in frequency domain but much different in magnitude of the spectral density ...
Contents
MECHANICAL PROPERTIES OF | 1 |
OFFSHORE MECHANICS AND ARCTIC ENGINEERING | 10 |
SizeEffect in IndentationInduced Splitting Floe Experiments | 29 |
Copyright | |
16 other sections not shown
Other editions - View all
Common terms and phrases
actuator analysis angle Arctic aspect ratio average behaviour berm calculated Canada coefficient compression constant contact area crack creep deformation crushed ice damage decrease deformation density displacement dynamic edge effect equation evaporator experimental extrusion fracture Frederking friction function heat transfer Hobson's Choice horizontal ice cover ice failure ice force ice fragment ice load ice plate ice rubble ice sample ice sheet ICE TEST ice thickness ice-structure interaction icebreaking icicle increases indentation rate indentation tests indentation velocity indentor Jordaan laser layer length Masterson material maximum measured mm/s modulus Molikpaq Offshore parameters plastic strain Poisson's ratio polycrystalline ice Pond Inlet Pressure MPa pumps rubble field rubble pile rubble system scale sea ice shown in Figure simulation Sinha spallation spalling spraying strain rate strength stress structure surface temperature tensile tensile strength tensile stress Timco values vertical viscous wind speed Young's modulus zone