Deformation and fracture mechanics of engineering materials
Updated to reflect recent developments in our understanding of deformation and fracture processes in structural materials. This completely revised reference includes new sections on isostress analysis, modulus of rupture, creep fracture micromechanicsms, and many more.
Results 1-3 of 79
EXAMPLE 3.1 Three cylindrically-shaped tensile samples, each 12-mm in
diameter, were machined from three different spherically-shaped single crystals.
Samples A and B yielded with applied loads of 77.1 and 56 N, respectively. Does
The large reduction in fracture energy at a given temperature with the presence
of a notch is attributed to the high strain rate at the notch root and the virtual
elimination of energy necessary to initiate a crack in the sample. A comparison of
Samples are examined periodically to determine when the crack stops growing.
The tfiEac value is then defined by the residual applied load remaining after the
crack has ceased growing and the final crack length as seen on the fracture ...
What people are saying - Write a review
LibraryThing ReviewUser Review - all4metals - LibraryThing
This is one of the best textbooks on physical metallurgy. My preference is for Dieter's book, but that is because it was the textbook for my physical metallurgy course in graduate school. Hertzberg's book is more modern. Read full review
This is a great book, not only work as a text book, but also a sophisticate reference book.