Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 15, Part 3American Society of Mechanical Engineers, 1996 - Arctic regions |
From inside the book
Results 1-3 of 80
Page 444
... Axial tension Y 1 Axial tension Gibstein [ 8 ] T 4 Axial tension Machida et al . [ 9 ] T 2 Axial tension Van den Brink et al . [ 10 ] T 2 Axial tension Moe et al . [ 11 ] T 2 Axial compression ; Axial tension Y 1 Axial compression K 1 ...
... Axial tension Y 1 Axial tension Gibstein [ 8 ] T 4 Axial tension Machida et al . [ 9 ] T 2 Axial tension Van den Brink et al . [ 10 ] T 2 Axial tension Moe et al . [ 11 ] T 2 Axial compression ; Axial tension Y 1 Axial compression K 1 ...
Page 446
... Axial tension Through thickness 0.20 , 0.26 , 0.33 T 2 Axial tension Surface 0.20 0.25T , 0.50T 2 OPB Through thickness 0.20 , 0.25 T 2 OPB Surface 0.20 , 0.20 0.25T , 0.50T 0.50 18.40 0.96 1 Axial compression 5 Axial tension Through ...
... Axial tension Through thickness 0.20 , 0.26 , 0.33 T 2 Axial tension Surface 0.20 0.25T , 0.50T 2 OPB Through thickness 0.20 , 0.25 T 2 OPB Surface 0.20 , 0.20 0.25T , 0.50T 0.50 18.40 0.96 1 Axial compression 5 Axial tension Through ...
Page 447
... Axial tension 324 6.35 7.67 0.84 25.50 1.00 1 0.02 0.04 3 DT Axial tension 142 5 N.A 0.34 14.60 1.00 1 0.09 , 0.13 , 0.25 3 DT Axial tension 141 5 N.A 0.54 14.60 1.00 1 0.06 , 0.09 , 0.2 3 DT Axial tension 139 5 N.A 0.82 14.60 1.00 1 ...
... Axial tension 324 6.35 7.67 0.84 25.50 1.00 1 0.02 0.04 3 DT Axial tension 142 5 N.A 0.34 14.60 1.00 1 0.09 , 0.13 , 0.25 3 DT Axial tension 141 5 N.A 0.54 14.60 1.00 1 0.06 , 0.09 , 0.2 3 DT Axial tension 139 5 N.A 0.82 14.60 1.00 1 ...
Contents
CODES AND STANDARDS | 1 |
EFFECT OF WELDING PARAMETERS ON JOINT PROPERTIES | 35 |
UNDERWATER WELDING AND REPAIR | 85 |
Copyright | |
9 other sections not shown
Other editions - View all
Common terms and phrases
a'-martensite analysis applied as-welded assessment austenite Axial tension base metal behaviour bending brace brittle butt welds cathodic protection CFRC chord crack cold-rolling composition corrosion corrosion fatigue crack depth crack growth rates crack initiation crack tip cracked joints CTOD curve cycles defects effect electrode Engineering equations evaluation experimental failure fatigue crack growth fatigue tests ferrite Figure fracture mechanics fracture toughness geometry heat affected zone heat treatment high strength steels hydrogen increased inspection martensite material measured microstructure mis-match notch offshore structures parameters performance pipe predicted pressure procedure PWHT ratio reduced residual stresses riser root S-N curves saddle seawater shielding gas shown simulation specimens static strength stiffened joints stress intensity factor surface crack Table temperature tensile thickness titanium alloys tubular joints ultrasonic unstiffened values weld joint weld metal weld toe weldments wide plates yield strength