Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 15, Part 3American Society of Mechanical Engineers, 1996 - Arctic regions |
From inside the book
Results 1-3 of 65
Page 29
... Brace Axial Loading Chord maximum hot - spot location Ω = 0.7026α 0.0236 - exp ( -0.1878 + 0.0097y + 0.0047 / 03 - 21.7B3 + 0.3038ẞt - 0.0867ẞ2 / 03 - 0.001y150 ) Brace maximum hot - spot location 0.0603 Ω = 0.6763α ° y0.118 7024. exp ...
... Brace Axial Loading Chord maximum hot - spot location Ω = 0.7026α 0.0236 - exp ( -0.1878 + 0.0097y + 0.0047 / 03 - 21.7B3 + 0.3038ẞt - 0.0867ẞ2 / 03 - 0.001y150 ) Brace maximum hot - spot location 0.0603 Ω = 0.6763α ° y0.118 7024. exp ...
Page 486
... brace / chord weld root and propagated through the weld throat . In the brace , cracks initiating at the brace / chord weld toe tended to propagate through - thickness normal to the brace wall , regardless of position . In the T ...
... brace / chord weld root and propagated through the weld throat . In the brace , cracks initiating at the brace / chord weld toe tended to propagate through - thickness normal to the brace wall , regardless of position . In the T ...
Page 489
... Brace 221 222 870 T3 Chord saddle + 20 ° 167 123 310 Chord + 20 ° 158 85 2273 K2 Brace 213 840 Chord 214 89 460 E = T4 Chord saddle + 20 ° 177 60 510 TS Centre RIE 391 124 174 Brace saddle ( BRI ) Chord saddle 177 - 1800 180 80 Outer ...
... Brace 221 222 870 T3 Chord saddle + 20 ° 167 123 310 Chord + 20 ° 158 85 2273 K2 Brace 213 840 Chord 214 89 460 E = T4 Chord saddle + 20 ° 177 60 510 TS Centre RIE 391 124 174 Brace saddle ( BRI ) Chord saddle 177 - 1800 180 80 Outer ...
Contents
CODES AND STANDARDS | 1 |
EFFECT OF WELDING PARAMETERS ON JOINT PROPERTIES | 35 |
UNDERWATER WELDING AND REPAIR | 85 |
Copyright | |
9 other sections not shown
Other editions - View all
Common terms and phrases
a'-martensite analysis applied as-welded assessment austenite Axial tension base metal behaviour bending brace brittle butt welds cathodic protection CFRC chord crack cold-rolling composition corrosion corrosion fatigue crack depth crack growth rates crack initiation crack tip cracked joints CTOD curve cycles defects effect electrode Engineering equations evaluation experimental failure fatigue crack growth fatigue tests ferrite Figure fracture mechanics fracture toughness geometry heat affected zone heat treatment high strength steels hydrogen increased inspection martensite material measured microstructure mis-match notch offshore structures parameters performance pipe predicted pressure procedure PWHT ratio reduced residual stresses riser root S-N curves saddle seawater shielding gas shown simulation specimens static strength stiffened joints stress intensity factor surface crack Table temperature tensile thickness titanium alloys tubular joints ultrasonic unstiffened values weld joint weld metal weld toe weldments wide plates yield strength