Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 15, Part 3American Society of Mechanical Engineers, 1996 - Arctic regions |
From inside the book
Results 1-3 of 56
Page 134
... reported [ 2 , 3 ] . Longer TIG arcs may therefore be divided in four parts : Cathode region Plasma region with high position dependent field strength Plasma region with nearly constant field strength Anode region . For short arc length ...
... reported [ 2 , 3 ] . Longer TIG arcs may therefore be divided in four parts : Cathode region Plasma region with high position dependent field strength Plasma region with nearly constant field strength Anode region . For short arc length ...
Page 499
... reported . Rapid cracking in the rings was observed , and preceded loss of stiffness by 0 to 15 % of the quoted life ... reported in Ref [ 7 ] . Here , unstiffened T joint data are reported for specimens of identical dimensions to those ...
... reported . Rapid cracking in the rings was observed , and preceded loss of stiffness by 0 to 15 % of the quoted life ... reported in Ref [ 7 ] . Here , unstiffened T joint data are reported for specimens of identical dimensions to those ...
Page 523
... reported by Niu and Glinka ( 1987 ) and Shen and Glinka ( 1991 ) . Recent applications of the " O " weight function , proposed by Oore and Burns ( 1980 ) , to cracks in tubular joints have been reported by Forbes et al ( 1991 and 1992 ) ...
... reported by Niu and Glinka ( 1987 ) and Shen and Glinka ( 1991 ) . Recent applications of the " O " weight function , proposed by Oore and Burns ( 1980 ) , to cracks in tubular joints have been reported by Forbes et al ( 1991 and 1992 ) ...
Contents
CODES AND STANDARDS | 1 |
EFFECT OF WELDING PARAMETERS ON JOINT PROPERTIES | 35 |
UNDERWATER WELDING AND REPAIR | 85 |
Copyright | |
9 other sections not shown
Other editions - View all
Common terms and phrases
a'-martensite analysis applied as-welded assessment austenite Axial tension base metal behaviour bending brace brittle butt welds cathodic protection CFRC chord crack cold-rolling composition corrosion corrosion fatigue crack depth crack growth rates crack initiation crack tip cracked joints CTOD curve cycles defects effect electrode Engineering equations evaluation experimental failure fatigue crack growth fatigue tests ferrite Figure fracture mechanics fracture toughness geometry heat affected zone heat treatment high strength steels hydrogen increased inspection martensite material measured microstructure mis-match notch offshore structures parameters performance pipe predicted pressure procedure PWHT ratio reduced residual stresses riser root S-N curves saddle seawater shielding gas shown simulation specimens static strength stiffened joints stress intensity factor surface crack Table temperature tensile thickness titanium alloys tubular joints ultrasonic unstiffened values weld joint weld metal weld toe weldments wide plates yield strength