Results 1-3 of 73
15.11. An extruder has barrel diameter and length of 100 mm and 2.8 m,
respectively. The screw rotational speed = 50 rev/min, channel depth = 7.5 mm,
and flight angle = 17°. The plastic melt has a shear viscosity = 175 Pas.
Determine (a) the ...
A workbar 5.0 in. in diameter and 48 in. in length is chucked in an engine lathe
and supported at the opposite end using a live center. A 40.0-in. portion of the
length is to be turned to a diameter of 4.75 in one pass at a speed = 400 ft/min
and a ...
-diameter screw is to be preloaded to a tension force F = 1000 lb. Torque
coefficient C = 0.22. Determine the torque that should be used to tighten the bolt.
31.2. A 5-mm-diameter bolt is to be tightened to produce a preload = 25 N. If the
What people are saying - Write a review
LibraryThing ReviewUser Review - all4metals - LibraryThing
I love this book for manufacturing. Kalpakjian is the standard, but the recent additions have been dumbed down. Groover does an excellent job of cover almost every manufacturing process and some of ... Read full review
LibraryThing ReviewUser Review - safina1 - LibraryThing
this is a good book Read full review
Material Properties Product Attributes and Related
THE NATURE OF MATERIALS
33 other sections not shown