Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3American Society of Mechanical Engineers, 1990 - Arctic regions |
From inside the book
Results 1-3 of 86
Page 258
... critical CTOD values of weld HAZ quantitatively among the various steel plates . In the present study , the critical CTOD for weld HAZ of various steels with a sufficient data for the statistical analysis was used . Fracture toughness ...
... critical CTOD values of weld HAZ quantitatively among the various steel plates . In the present study , the critical CTOD for weld HAZ of various steels with a sufficient data for the statistical analysis was used . Fracture toughness ...
Page 269
... critical tooth of a pre - loaded connection varies as axial load is applied from zero to its maximum value . However , the ratio of the local stress range at the root of the tooth to the nominal average axial stress range at this tooth ...
... critical tooth of a pre - loaded connection varies as axial load is applied from zero to its maximum value . However , the ratio of the local stress range at the root of the tooth to the nominal average axial stress range at this tooth ...
Page 448
... Critical CTOD , mm Fig . 13 Comparison of Weibull plot the critical CTOD from experiment and simulation ( LBZ CG , SRCG , IRCG ) . = mm Critical CTOD , 1.0 0.8 - 0.6 0.4 0.2 000 O ww Critical CTOD , 0 0.1 0.3 O 1 5 % 10 % dc.5 dc.10 oc ...
... Critical CTOD , mm Fig . 13 Comparison of Weibull plot the critical CTOD from experiment and simulation ( LBZ CG , SRCG , IRCG ) . = mm Critical CTOD , 1.0 0.8 - 0.6 0.4 0.2 000 O ww Critical CTOD , 0 0.1 0.3 O 1 5 % 10 % dc.5 dc.10 oc ...
Contents
ADVANCED COMPOSITES | 1 |
The Use of GRP Materials in Platform Topsides Construction and the Regulatory Implications | 15 |
Low Cost Manufacturing Technology for FireResistant Phenolic Matrix Composites | 21 |
Copyright | |
25 other sections not shown
Other editions - View all
Common terms and phrases
applied as-welded ASTM axial load behaviour bending brace calculated components Composite Materials compression concrete Conoco Inc corrosion rate crack depth crack propagation CTOD cycles damage delamination developed elastomer Engineering experimental failure fatigue design fatigue limit fatigue strength fatigue tests finite element analysis forged nodes fracture mechanics fracture toughness geometry hot spot stress intersection laminate Marine matrix maximum mean stress method mode modulus nominal notch obtained offshore structures parameters performance pipe plate thickness platform pre-load predicted pressure principal stress properties pultrusion ratio rebar reinforcement resin resistance ring stiffened riser rubber S-N curve seal shear stress shell elements shown in Figure specimens steel stiffness strain stress analysis stress concentration stress concentration factor stress intensity factor stress range surface crack T-joint Table technique tensile tension thickness effect threaded joint tube tubular joints weld profile weld toe welded joints yield strength zone