Engineering Materials: Properties and SelectionFor courses in Metallurgy and Materials Science. Co-authored by Kenneth G. Budinski and Michael K. Budinski, his son, with over 50 years of combined industry experience in the field, this practical, understandable introduction to engineering materials theory and industry-standard selection practices provides students with the working knowledge to (1) make an informed selection of materials for engineering applications and (2) correctly specify materials on drawings and purchasing documents. Encompassing all significant material systems metals, ceramics, plastics, and composites this text incorporates the most up-to-date information on material usage and availability, addresses the increasingly global nature of the field, and reflects the suggestions of numerous adopters of previous editions. |
From inside the book
Results 1-3 of 80
... thickness , minus noth- ing . If a part requires a minimum thickness of , for example , 0.500 in . , the thickness tolerances should be investigated on candidate materials for a part under design . If a material with a nominal thickness ...
... thickness 25 ° C / h Nylon 6 40 ° C / h 150 ° C Nylon 66 40 ° C / h 175 ° C 5 min / mm thickness 5 min / mm thickness 25 ° C / h Nitrogen Nitrogen or oil 25 ° C / h Nitrogen or oil PBT 30 ° C / h Polyethlyene 40 ° C / h The HDT at 1.8 ...
... thickness ) retained in steel housing Reduction in bearing clearance , mils 2 ence fit equations that can be used to determine proper interferences , but there are guidelines such as 0.1 % of the bushing outside diameter in- terference ...
Other editions - View all
Engineering Materials: Properties and Selection Kenneth G. Budinski,Michael K. Budinski No preview available - 2002 |