Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 60
Page 56
... cold room kept at -20 ° C ± 0.1 ° C on specimens with final dimensions of 50 mm x 100 mm x 250 mm , having the 100 mm x 250 mm faces at right angles to the length of the columnar - grains . They were machined with a milling machine and ...
... cold room kept at -20 ° C ± 0.1 ° C on specimens with final dimensions of 50 mm x 100 mm x 250 mm , having the 100 mm x 250 mm faces at right angles to the length of the columnar - grains . They were machined with a milling machine and ...
Page 118
... cold room where the temperature was set around -15 ° C . They were taken to the cold room where they were to be tested at least three hours prior to testing to let them achieve a uniform temperature equal to that of the room . This testing ...
... cold room where the temperature was set around -15 ° C . They were taken to the cold room where they were to be tested at least three hours prior to testing to let them achieve a uniform temperature equal to that of the room . This testing ...
Page 298
... cold lake or sea - water , water - ice slurries , etc. This anomalous behavior of cold water density on temperature makes it clear that the usual linear Boussinesq approximation of the tem- perature effect on density used in ...
... cold lake or sea - water , water - ice slurries , etc. This anomalous behavior of cold water density on temperature makes it clear that the usual linear Boussinesq approximation of the tem- perature effect on density used in ...
Contents
OFFSHORE MECHANICS | 1 |
The Structure and Tensile Behavior of First Year Sea Ice and LaboratoryGrown Saline | 11 |
Effects of Temperature and Strain Rate on Uniaxial Compressive Strength of Naturally Formed Fresh | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
analysis Arctic Engineering average beam Beaufort Sea Bering Sea caisson crack creep curves deflection deformation diameter dome drift dynamic effect elastic modulus energy equation estimate experimental extreme value distribution factor failure flexural strength floe fracture toughness freezing friction coefficient gauges geostrophic wind horizontal ice crushing ice domes ice drift ice edge ice force Ice Impact ice loads ice motion ice pressure ice sheet ice thickness ice velocity iceberg icebreaking increase indentation interaction island layer linear measured Mechanics and Arctic method MIZEX model ice model tests modulus Molikpaq normal force ocean Offshore Mechanics parameters peak plastic platform pressure panel PVDF ratio reinforced ice Research saline samples scale sea ice sediments shear shear strength ship shown in Figure specimen speed spray ice strain gauges strain rate stress structure surface temperature tensor thermosyphon Timco tion uniaxial values vertical wind