Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 257
... SCALE TESTS The model - scale tests were conducted only in level ice with scaled ice parameters : ice thickness 60 mm and ice flexural strength 55 kPa , corresponding to the thickness of 0.60 m and strength of 550 kPa in full scale ...
... SCALE TESTS The model - scale tests were conducted only in level ice with scaled ice parameters : ice thickness 60 mm and ice flexural strength 55 kPa , corresponding to the thickness of 0.60 m and strength of 550 kPa in full scale ...
Page 258
... scale than in full scale . the The maximum normal forces recorded during full - scale level ice tests were 127 kN and 35 kN for the high and low pressure panel , respectively . For the model - scale high pressure panel , a few very high ...
... scale than in full scale . the The maximum normal forces recorded during full - scale level ice tests were 127 kN and 35 kN for the high and low pressure panel , respectively . For the model - scale high pressure panel , a few very high ...
Page 259
... scale and model - scale measurements , is gratefully acknowledged . The anonymous reviewers for comments on a draft of this paper and for suggested new linear relationship between normal and tangential force are gratefully acknowledged ...
... scale and model - scale measurements , is gratefully acknowledged . The anonymous reviewers for comments on a draft of this paper and for suggested new linear relationship between normal and tangential force are gratefully acknowledged ...
Contents
OFFSHORE MECHANICS | 1 |
The Structure and Tensile Behavior of First Year Sea Ice and LaboratoryGrown Saline | 11 |
Effects of Temperature and Strain Rate on Uniaxial Compressive Strength of Naturally Formed Fresh | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
analysis Arctic Arctic Engineering average beam Beaufort Sea Bering Sea buoys caisson compressive crack creep curves deflection deformation delayed elastic density diameter dome drift dynamic effect EGADS energy equation estimate experimental factor failure flexural strength floe fracture toughness freshwater ice friction coefficient gauges geostrophic wind horizontal ice drift ice edge ice force ice loads ice motion ice pressure ice sheet ice tests ice thickness ice velocity iceberg icebreaking impact increase indentation interaction island layer linear measured Mechanics and Arctic method MIZEX model ice model tests modulus Molikpaq normal force ocean Offshore Mechanics parameters peak pressure panel PVDF ratio reinforced ice Research saline samples scale sea ice sediments shear shear strength ship shown in Figure Sinha specimen speed spray ice strain gauges strain rate stress structure surface temperature tensor thermosyphon Timco tion uniaxial values vertical wind