Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 76
Page 13
3c A vertically oriented thin section from the upper half of Block 3 , Core 1 . ... To avoid excessive brine drainage , the vertical cores were stored in a horizontal position and the horizontal cores were stored in a vertical position ...
3c A vertically oriented thin section from the upper half of Block 3 , Core 1 . ... To avoid excessive brine drainage , the vertical cores were stored in a horizontal position and the horizontal cores were stored in a vertical position ...
Page 14
At the higher strain rate , both the horizontally and the vertically oriented samples produced nearly linear curves ... Specifically , at 10-75-1 the average strength of the vertical specimens was 1.02 * 0.12 MPa compared with 0.28 0.06 ...
At the higher strain rate , both the horizontally and the vertically oriented samples produced nearly linear curves ... Specifically , at 10-75-1 the average strength of the vertical specimens was 1.02 * 0.12 MPa compared with 0.28 0.06 ...
Page 244
6b 99.00 41.00 49 , 00 57.00 65,00 CONE ANGLE ( DEG ) The Effect of Cone Inclination on Adjusted Horizontal and Vertical Forces at igh Velocities ( 05-31 kPa ) Fig . 5b The Effect of Ice Thickness on Adjusted Vertical Force ( os 36 kPa ) ...
6b 99.00 41.00 49 , 00 57.00 65,00 CONE ANGLE ( DEG ) The Effect of Cone Inclination on Adjusted Horizontal and Vertical Forces at igh Velocities ( 05-31 kPa ) Fig . 5b The Effect of Ice Thickness on Adjusted Vertical Force ( os 36 kPa ) ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
OFFSHORE MECHANICS | 1 |
The Structure and Tensile Behavior of First Year Sea Ice and LaboratoryGrown Saline | 11 |
Effects of Temperature and Strain Rate on Uniaxial Compressive Strength of Naturally Formed Fresh | 19 |
Copyright | |
29 other sections not shown
Other editions - View all
Common terms and phrases
analysis angle approximately Arctic assumed average beam boundary calculated coefficient Cold components conducted Conference constant crack creep crushing curves deflection dependence described determined developed direction drift dynamic effect elastic energy Engineering equation estimated experimental experiments factor failure field Figure flexural flow fracture friction function given grain heat horizontal ice force ice loads ice sheet ice velocity iceberg impact increase indentation indicates International island layer length limit linear material mean measured Mechanics method motion Norton Sound observed obtained ocean Offshore operating oriented parameters POSITION presented pressure properties range ratio reference region relative Report Research response saline samples scale sea ice shape ship shown shows specimen speed strain rate strength stress structure surface Table temperature tests theory thickness tion values variations vertical wind
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1988 |
| Export Citation | BiBTeX EndNote RefMan |