Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 20
Page 253
Fusion line + 2 mm Temperature , ° C Fig.11 Charpy impact test result of SMAW welds for simulation of girth weldability . ( X80 plate : 19.1 mm thick ) Proceedings of OMAE99 , 18th International Conference On Offshore Mechanics. Table 7 ...
Fusion line + 2 mm Temperature , ° C Fig.11 Charpy impact test result of SMAW welds for simulation of girth weldability . ( X80 plate : 19.1 mm thick ) Proceedings of OMAE99 , 18th International Conference On Offshore Mechanics. Table 7 ...
Page 259
... Charpy impact properties Location Direction aging " Absorbed energy ( J ) 50 % -60 ° C -80 ° C -100 °C | FATT ( C ) ... test Test 1 piece Location Direction TNDT type ( °C ) P - 2 subsurface T No 324 5 % + aging 310 291 305 258 -135 231 ...
... Charpy impact properties Location Direction aging " Absorbed energy ( J ) 50 % -60 ° C -80 ° C -100 °C | FATT ( C ) ... test Test 1 piece Location Direction TNDT type ( °C ) P - 2 subsurface T No 324 5 % + aging 310 291 305 258 -135 231 ...
Page 312
... Charpy impact test results of SAW - 1 ( 5kJ / mm ) Temperature ( ° C ) Fig.9 Charpy impact test results of SMAW -2 ( vertical up ) Absorbed energy ( J ) 200 AW1 / 41 AW1 / 21 AW3 / 41 150 100 50 Î 0 -120 -100 -80 -60 SAW 10kJ / mm -40 ...
... Charpy impact test results of SAW - 1 ( 5kJ / mm ) Temperature ( ° C ) Fig.9 Charpy impact test results of SMAW -2 ( vertical up ) Absorbed energy ( J ) 200 AW1 / 41 AW1 / 21 AW3 / 41 150 100 50 Î 0 -120 -100 -80 -60 SAW 10kJ / mm -40 ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
absorbed energy analysis Arctic Engineering July ASME assessment austenite base metal behavior bending brace CGHAZ Charpy impact Charpy impact test chord component composite material Conference On Offshore copper backing Copyright CTOD value curve cyclic defects developed dynamic effect Engineering July 11-16 equations equivalent CTOD evaluated fatigue tests ferrite fiber fire flux fracture toughness geometry GMAW GTAW HAZ toughness heat input increase intumescents iteration matrix maximum mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters passive fire protection porosity procedure Proceedings of OMAE99 PWHT ratio requirements residual stress risers S-N curve SCFEX shielding gas short circuiting SINTAP specimens standards steel plates strain stress intensity submerged arc welding surface Table temperature test results thickness titanium underwater welding Weibull stress weld metal weld pool weld toe welded joints wet welding wide plate wire yield strength