Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 17
Page 129
... GTAW / PGTAW 1G 1 side PGTAW / SMAW 5G 2 sides SAW 5G 1 side GTAW / SMAW some specimens the weld cap was also removed by grinding , and for others the weld cap was left as welded . All welds were subjected to ultrasonic and radiographic ...
... GTAW / PGTAW 1G 1 side PGTAW / SMAW 5G 2 sides SAW 5G 1 side GTAW / SMAW some specimens the weld cap was also removed by grinding , and for others the weld cap was left as welded . All welds were subjected to ultrasonic and radiographic ...
Page 137
... GTAW Table 1. Fatigue Test Results Specimen Designation Stress Range (. OMAE99 / MAT - 2004 William C. Mohr Edison Welding Institute 1250 Arthur E. Adams Drive Columbus , Ohio 43221-3585 Tel / Fax : 614-688-5182 / -5001 William_mohr@ewi ...
... GTAW Table 1. Fatigue Test Results Specimen Designation Stress Range (. OMAE99 / MAT - 2004 William C. Mohr Edison Welding Institute 1250 Arthur E. Adams Drive Columbus , Ohio 43221-3585 Tel / Fax : 614-688-5182 / -5001 William_mohr@ewi ...
Page 285
400 DEVELOPMENT OF OFFSHORE STRUCTURE STEELS AND WELDING MATERIALS FOR ULTRA. GTAW Average Hardness , Hv / 98MPa 340 320 As Welde 300 280 260 240 220 200 GTAW 110ppm After Temperin SAW 50 m Fig . 3 Microstructure of weld metals obtained by ...
400 DEVELOPMENT OF OFFSHORE STRUCTURE STEELS AND WELDING MATERIALS FOR ULTRA. GTAW Average Hardness , Hv / 98MPa 340 320 As Welde 300 280 260 240 220 200 GTAW 110ppm After Temperin SAW 50 m Fig . 3 Microstructure of weld metals obtained by ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
absorbed energy analysis Arctic Engineering July ASME assessment austenite base metal behavior bending brace CGHAZ Charpy impact Charpy impact test chord component composite material Conference On Offshore copper backing Copyright CTOD value curve cyclic defects developed dynamic effect Engineering July 11-16 equations equivalent CTOD evaluated fatigue tests ferrite fiber fire flux fracture toughness geometry GMAW GTAW HAZ toughness heat input increase intumescents iteration matrix maximum mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters passive fire protection porosity procedure Proceedings of OMAE99 PWHT ratio requirements residual stress risers S-N curve SCFEX shielding gas short circuiting SINTAP specimens standards steel plates strain stress intensity submerged arc welding surface Table temperature test results thickness titanium underwater welding Weibull stress weld metal weld pool weld toe welded joints wet welding wide plate wire yield strength