Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 55
Page 148
... Base material ( pipe ) as well as consumable ring consisted of ASTM Grade 29 alloy ( Ti - 6A14V - 0.1Ru ELI ) . Their chemical compositions are given in Table 1 . Table 1 : Chemical analysis of base materials Ti - 6Al - 4V - 0.1Ru ...
... Base material ( pipe ) as well as consumable ring consisted of ASTM Grade 29 alloy ( Ti - 6A14V - 0.1Ru ELI ) . Their chemical compositions are given in Table 1 . Table 1 : Chemical analysis of base materials Ti - 6Al - 4V - 0.1Ru ...
Page 150
... base material should be expected due to the higher yield strength of the consumable ring . Only two specimens tested at 150 ° C and loads at high maximum ( max 730/680 MPa , NF 1.52x10 / 3.88x105 ) failed in the base material . In none ...
... base material should be expected due to the higher yield strength of the consumable ring . Only two specimens tested at 150 ° C and loads at high maximum ( max 730/680 MPa , NF 1.52x10 / 3.88x105 ) failed in the base material . In none ...
Page 289
... base metal , and HAZ toughness . It mainly consist of control of amount of Cu , Ni , Nb in order to control the HAZ microstructure and improve strength of base metal . Addition of small amount of Nb content is also conducted to suppress ...
... base metal , and HAZ toughness . It mainly consist of control of amount of Cu , Ni , Nb in order to control the HAZ microstructure and improve strength of base metal . Addition of small amount of Nb content is also conducted to suppress ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
absorbed energy analysis Arctic Engineering July ASME assessment austenite base metal behavior bending brace CGHAZ Charpy impact Charpy impact test chord component composite material Conference On Offshore copper backing Copyright CTOD value curve cyclic defects developed dynamic effect Engineering July 11-16 equations equivalent CTOD evaluated fatigue tests ferrite fiber fire flux fracture toughness geometry GMAW GTAW HAZ toughness heat input increase intumescents iteration matrix maximum mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters passive fire protection porosity procedure Proceedings of OMAE99 PWHT ratio requirements residual stress risers S-N curve SCFEX shielding gas short circuiting SINTAP specimens standards steel plates strain stress intensity submerged arc welding surface Table temperature test results thickness titanium underwater welding Weibull stress weld metal weld pool weld toe welded joints wet welding wide plate wire yield strength