Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 44
Page 191
... critical fatigue stress function , the effect of the off - axis angle , and the multaxial stress interaction parameter for R = 0 . The emphasis in the fatigue failure theory development here has been so far placed on the critical ...
... critical fatigue stress function , the effect of the off - axis angle , and the multaxial stress interaction parameter for R = 0 . The emphasis in the fatigue failure theory development here has been so far placed on the critical ...
Page 202
... critical in the selection of reinforcing fiber material . This is especially critical in applications that are operating in aggressive environments at high temperatures . Fiber materials laid up in single or hybrid combinations give ...
... critical in the selection of reinforcing fiber material . This is especially critical in applications that are operating in aggressive environments at high temperatures . Fiber materials laid up in single or hybrid combinations give ...
Page 267
... Critical CTOD ( mm ) ( a ) Overmatched joint لس 0.02 0.05 0.1 لسيل 0.5 1.0 Critical CTOD ( mm ) ( b ) Matched joint 2 3.0 0.02 0.05 0.1 888 ם ום m m 0.5 1.0 Critical CTOD ( mm ) ( c ) Undermatched joint Fig . 6 Distributions of critical ...
... Critical CTOD ( mm ) ( a ) Overmatched joint لس 0.02 0.05 0.1 لسيل 0.5 1.0 Critical CTOD ( mm ) ( b ) Matched joint 2 3.0 0.02 0.05 0.1 888 ם ום m m 0.5 1.0 Critical CTOD ( mm ) ( c ) Undermatched joint Fig . 6 Distributions of critical ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
addition analysis applications approach ASME assessment base behavior bending CGHAZ Charpy compared component composite condition Conference Copyright crack critical CTOD curve defects deposition depth determined developed distribution dynamic effect element energy Engineering equations equivalent evaluated factors failure fatigue ferrite Figure fire fracture toughness function geometry given hardness heat input impact important improve increase initiation International joints length limit loading lower material matrix maximum mean measured mechanical method microstructure molten observed obtained offshore operating parameters performance phase pipe plate prediction present pressure procedure production properties protection range ratio reduced region requirements residual stress respectively risers safety ship shown shows specimens standards steel strain strength structures surface Table temperature tensile thickness values weld metal welded joints wire yield