Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 76
Page 50
... PROPERTIES Welding Parameters The addition of electrode wires to a multi - wire system results in an increase in total welding current which is countered by increased welding travel speed . The relative increases in welding current and ...
... PROPERTIES Welding Parameters The addition of electrode wires to a multi - wire system results in an increase in total welding current which is countered by increased welding travel speed . The relative increases in welding current and ...
Page 256
... properties NRL | Welding Heat absorbed 50 % TNDT input ( C ) method ( kJ / mm ) Table 2 Metallurgical mesures for improving HAZ toughness at low. Base metal Welded joint YS TS EL Charpy Impact properties CTOD value ( mm ) at -40 °C ...
... properties NRL | Welding Heat absorbed 50 % TNDT input ( C ) method ( kJ / mm ) Table 2 Metallurgical mesures for improving HAZ toughness at low. Base metal Welded joint YS TS EL Charpy Impact properties CTOD value ( mm ) at -40 °C ...
Page 259
... properties Strain and Charpy impact properties Location Direction aging " Absorbed energy ( J ) 50 % -60 ° C -80 ° C -100 °C | FATT ( C ) -10-20-3040-50 -60 Fig.8 Results of temperature gradient type of ESSO. Tensile properties Location ...
... properties Strain and Charpy impact properties Location Direction aging " Absorbed energy ( J ) 50 % -60 ° C -80 ° C -100 °C | FATT ( C ) -10-20-3040-50 -60 Fig.8 Results of temperature gradient type of ESSO. Tensile properties Location ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
addition analysis applications approach ASME assessment base behavior bending CGHAZ Charpy compared component composite condition Conference Copyright crack critical CTOD curve defects deposition depth determined developed distribution dynamic effect element energy Engineering equations equivalent evaluated factors failure fatigue ferrite Figure fire fracture toughness function geometry given hardness heat input impact important improve increase initiation International joints length limit loading lower material matrix maximum mean measured mechanical method microstructure molten observed obtained offshore operating parameters performance phase pipe plate prediction present pressure procedure production properties protection range ratio reduced region requirements residual stress respectively risers safety ship shown shows specimens standards steel strain strength structures surface Table temperature tensile thickness values weld metal welded joints wire yield