Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 3American Society of Mechanical Engineers, 2000 - Arctic regions |
From inside the book
Results 1-3 of 62
Page 32
... joints 25-100 Tubular & pipe 22-50 1.4 0.6-2.0 376-421 360-490 to plate joints Repair welds 75-152 1.2-1.6 500 - 590 Table 1 Overview of residual stress data experimental work on thick , welded A533B steel plates . In addition , a study ...
... joints 25-100 Tubular & pipe 22-50 1.4 0.6-2.0 376-421 360-490 to plate joints Repair welds 75-152 1.2-1.6 500 - 590 Table 1 Overview of residual stress data experimental work on thick , welded A533B steel plates . In addition , a study ...
Page 55
... joints in titanium risers is one important issue concerning the structural integrity of such systems . Fracture toughness data from RFW joints were generated from three point bending specimens extracted from welded pipes of Ti - 6Al ...
... joints in titanium risers is one important issue concerning the structural integrity of such systems . Fracture toughness data from RFW joints were generated from three point bending specimens extracted from welded pipes of Ti - 6Al ...
Page 134
... welded pipes is acceptable , providing that the state of the stress , i.e. the residual stress , and the defect size ... joints to predict the performance of girth welded pipes , providing the data are properly analyzed . RECOMMENDED S ...
... welded pipes is acceptable , providing that the state of the stress , i.e. the residual stress , and the defect size ... joints to predict the performance of girth welded pipes , providing the data are properly analyzed . RECOMMENDED S ...
Contents
STRUCTURAL INTEGRITY PROCEDURES FOR EUROPE SINTAP | 1 |
OMAE99MAT2041 | 9 |
Development of the SINTAP Failure Assessment Diagrams for Compatibility With | 19 |
Copyright | |
28 other sections not shown
Other editions - View all
Common terms and phrases
addition analysis applications approach ASME assessment base behavior bending CGHAZ Charpy compared component composite condition Conference Copyright crack critical CTOD curve defects deposition depth determined developed distribution dynamic effect element energy Engineering equations equivalent evaluated factors failure fatigue ferrite Figure fire fracture toughness function geometry given hardness heat input impact important improve increase initiation International joints length limit loading lower material matrix maximum mean measured mechanical method microstructure molten observed obtained offshore operating parameters performance phase pipe plate prediction present pressure procedure production properties protection range ratio reduced region requirements residual stress respectively risers safety ship shown shows specimens standards steel strain strength structures surface Table temperature tensile thickness values weld metal welded joints wire yield