Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 9American Society of Mechanical Engineers, 1990 - Arctic regions |
From inside the book
Results 1-3 of 54
Page 115
... marine environment with properties of concrete and steel . In the present investigation it is aimed to study the corrosion rate of steel in concrete under in - situ marine exposure conditions . The above study is carried out considering ...
... marine environment with properties of concrete and steel . In the present investigation it is aimed to study the corrosion rate of steel in concrete under in - situ marine exposure conditions . The above study is carried out considering ...
Page 202
... Marine Structures , Proceedings of the Int . Conf . Delf , June 1987 . 11. Steel in Marine Structures , Proceedings of the Int . Conf . , Paris , October 1981 . 12. Berge , S. and Engesvik , K. , " Effect of Thickness in Fatigue of ...
... Marine Structures , Proceedings of the Int . Conf . Delf , June 1987 . 11. Steel in Marine Structures , Proceedings of the Int . Conf . , Paris , October 1981 . 12. Berge , S. and Engesvik , K. , " Effect of Thickness in Fatigue of ...
Page 222
... Marine Struc- tures , Delft , June 15- 18 , 1987 , p.71 . 14 . de Back , J. Vaessen , G.H.G .: Effect of plate thickness , temperature and weld toe profile on the fatigue and corrosion fatigue behaviour of offshore steel structures ...
... Marine Struc- tures , Delft , June 15- 18 , 1987 , p.71 . 14 . de Back , J. Vaessen , G.H.G .: Effect of plate thickness , temperature and weld toe profile on the fatigue and corrosion fatigue behaviour of offshore steel structures ...
Contents
ADVANCED COMPOSITES | 1 |
Probabilistic Aspects of HAZ CTOD Value of Multipass Welded Joint of Steel for Offshore | 5 |
The Use of GRP Materials in Platform Topsides Construction and the Regulatory Implications | 15 |
35 other sections not shown
Other editions - View all
Common terms and phrases
analysis applications axial behaviour bending brace calculated carried chord combined compared components composite Composite Materials compression concrete connection considered construction corrosion crack crack growth critical curve cycles damage determined developed distribution effect element Engineering experimental factor failure fatigue fiber Figure finite element force fracture geometry increase indicate initial internal laminate length limit load lower Marine material matrix maximum mean measured mechanical method Mode nodes nominal normal observed obtained offshore operation parameters performance pipe plate platform position predicted present pressure production properties range ratio reduced reinforcement Research resin resistance seal shear shell shown shows specimen steel stiffener stiffness strain strength stress concentration structures surface Table techniques temperature tensile tension thickness thread tube tubular joints weight weld