Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 9American Society of Mechanical Engineers, 1990 - Arctic regions |
From inside the book
Results 1-3 of 54
Page 323
In the case of axial loading the presence of stiffeners reduced the SCF's from 23.5 10 7.5 on the chord and from 14.0 to 4.8 on the brace . This joint was analysed in this work under axial loading using the two types of finite element ...
In the case of axial loading the presence of stiffeners reduced the SCF's from 23.5 10 7.5 on the chord and from 14.0 to 4.8 on the brace . This joint was analysed in this work under axial loading using the two types of finite element ...
Page 330
Form the plate to the chord section radius . Pinite element analysis of a K - node ( Fig . 3 ) to compare the theoretical and experimental results in order to calibrate the mesh and the procedures . The thickness of the forged segment ...
Form the plate to the chord section radius . Pinite element analysis of a K - node ( Fig . 3 ) to compare the theoretical and experimental results in order to calibrate the mesh and the procedures . The thickness of the forged segment ...
Page 332
Compression Tension Welded Simple Complex Fatigue evaluation of the brace weld in complex nodes may be performed based on SCF of simple node geometry and neglecting the loads in the chord . 4.523 EZ 5.324 E7 5.210 B7 6.696 E7 8.220 E7 ...
Compression Tension Welded Simple Complex Fatigue evaluation of the brace weld in complex nodes may be performed based on SCF of simple node geometry and neglecting the loads in the chord . 4.523 EZ 5.324 E7 5.210 B7 6.696 E7 8.220 E7 ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
ADVANCED COMPOSITES | 1 |
The Use of GRP Materials in Platform Topsides Construction and the Regulatory Implications | 15 |
SAFETY AND RELIABILITY | 17 |
37 other sections not shown
Other editions - View all
Common terms and phrases
analysis applications axial behaviour bending brace calculated chord combined compared components composite Composite Materials compression concrete connection considered construction corrosion crack critical curve cycles damage determined developed distribution effect element Engineering environment experimental factor failure fatigue fiber Figure finite element force fracture geometry increase indicate influence initial internal laminate length limit load lower Marine material matrix maximum mean measured mechanical method Mode nodes nominal normal observed obtained offshore operation parameters performance pipe plate platform predicted present pressure production properties range ratio reduced reinforcement Research resin resistance seal shear shell shown shows solutions specimens steel stiffener stiffness strain strength stress stress concentration structures surface Table techniques temperature tensile tension thickness thread tube tubular joints weight weld
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 9 |
| Contributors | OMAE Conference Committee, American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division, American Society of Mechanical Engineers |
| Publisher | American Society of Mechanical Engineers, 1990 |
| Original from | the University of Michigan |
| Digitized | 4 Dec 2007 |
| Export Citation | BiBTeX EndNote RefMan |