Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 84
Page 84
the crack growth trends to Occur in a similar pattern through which extrapolation of crack depth growth can be possible beyond the plotted points . An identical trend to this was observed for the crack length growth plot , which is not ...
the crack growth trends to Occur in a similar pattern through which extrapolation of crack depth growth can be possible beyond the plotted points . An identical trend to this was observed for the crack length growth plot , which is not ...
Page 435
... growth in the K joint under OPB . The crack growth data from the second and the fourth tests were plotted together with the data from the first test in Figure 9. The growing portion in the third test also provided two data points in ...
... growth in the K joint under OPB . The crack growth data from the second and the fourth tests were plotted together with the data from the first test in Figure 9. The growing portion in the third test also provided two data points in ...
Page 577
... growth takes place in two directions with no proportionality . Additional factors such as , weld toe geometry , resid- ual stress , crack size and shape , crack orientation , service conditions and environment influence the growth rate ...
... growth takes place in two directions with no proportionality . Additional factors such as , weld toe geometry , resid- ual stress , crack size and shape , crack orientation , service conditions and environment influence the growth rate ...
Contents
ADVANCED COMPOSITES | 1 |
A Study of the MultiLayered GRP Composite Cylindrical Vessel | 13 |
Resistance of Composite Structures to Impact Loads | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
abrasion analysis as-welded assessment austenite axial base metal behaviour bending boron brittle fracture brittle zones CGHAZ Charpy chemical composition chord coarse grained HAZ concrete Conference on Offshore crack growth crack length CTOD tests CTOD values curve cycle defect effect fabrication ferrite fiber Figure fracture initiation fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen ICCGHAZ impact increase layup load low carbon low toughness martensite material maximum Mechanics and Arctic method niobium Offshore Mechanics offshore structures Oseberg parameters plastic plate thickness pop-in post weld heat preheat PWHT region residual stresses sampled simulated solidification cracking steel plates stiffeners stress concentration stress intensity factor submerged arc welding surface notched Table temperature tensile thermal TMCP transverse tubular joints weld metal weld toe weldability welded joints welding procedures weldments wide plate tests yield strength