Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 93
Page 100
... heat input welding of 11kJ / mm . The impact values in the welded joints with a heat input of 4.5kJ / mm was higher than 240J . The PWHT exerted little influence on the impact values in the welded joint of YS 460MPa class steel . OCTOD ...
... heat input welding of 11kJ / mm . The impact values in the welded joints with a heat input of 4.5kJ / mm was higher than 240J . The PWHT exerted little influence on the impact values in the welded joint of YS 460MPa class steel . OCTOD ...
Page 123
... heat input ยท - effect of PWHT - - effect of parent material toughness effect of parent material nitrogen and phosphorus content difference between ingot and concast material Variation in Toughness with Heat Input As welding heat input ...
... heat input ยท - effect of PWHT - - effect of parent material toughness effect of parent material nitrogen and phosphorus content difference between ingot and concast material Variation in Toughness with Heat Input As welding heat input ...
Page 193
... HEAT INPUT LIMITATION The previous section dealt with a proposal to shift the ma jor responsibility for HAZ properties to the steel purchaser with a consequent reduction in that attributed to the fabricator . However there remains a ...
... HEAT INPUT LIMITATION The previous section dealt with a proposal to shift the ma jor responsibility for HAZ properties to the steel purchaser with a consequent reduction in that attributed to the fabricator . However there remains a ...
Contents
ADVANCED COMPOSITES | 1 |
A Study of the MultiLayered GRP Composite Cylindrical Vessel | 13 |
Resistance of Composite Structures to Impact Loads | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
abrasion analysis as-welded assessment austenite axial base metal behaviour bending boron brittle fracture brittle zones CGHAZ Charpy chemical composition chord coarse grained HAZ concrete Conference on Offshore crack growth crack length CTOD tests CTOD values curve cycle defect effect fabrication ferrite fiber Figure fracture initiation fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen ICCGHAZ impact increase layup load low carbon low toughness martensite material maximum Mechanics and Arctic method niobium Offshore Mechanics offshore structures Oseberg parameters plastic plate thickness pop-in post weld heat preheat PWHT region residual stresses sampled simulated solidification cracking steel plates stiffeners stress concentration stress intensity factor submerged arc welding surface notched Table temperature tensile thermal TMCP transverse tubular joints weld metal weld toe weldability welded joints welding procedures weldments wide plate tests yield strength