Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 89
Page 111
... reduced as the carbon equivalent decreased although the extent of improvement was less than expected when judged by behaviour based on experience from older steels . It is considered that the main reason for a smaller than expected ...
... reduced as the carbon equivalent decreased although the extent of improvement was less than expected when judged by behaviour based on experience from older steels . It is considered that the main reason for a smaller than expected ...
Page 185
... reduced fracture toughness . The reduced fracture toughness in the coarse grained part of the HAZ is always due to a high portion of coarse grain size and / or coarce grained inter- critically reheated microstructures . The presence of ...
... reduced fracture toughness . The reduced fracture toughness in the coarse grained part of the HAZ is always due to a high portion of coarse grain size and / or coarce grained inter- critically reheated microstructures . The presence of ...
Page 210
... reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion . The minimum diameter of the reduced section was measured to the nearest 0,01 mm . Although the base metal tensile specimen ...
... reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion . The minimum diameter of the reduced section was measured to the nearest 0,01 mm . Although the base metal tensile specimen ...
Contents
ADVANCED COMPOSITES | 1 |
A Study of the MultiLayered GRP Composite Cylindrical Vessel | 13 |
Resistance of Composite Structures to Impact Loads | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
abrasion analysis as-welded assessment austenite axial base metal behaviour bending boron brittle fracture brittle zones CGHAZ Charpy chemical composition chord coarse grained HAZ concrete Conference on Offshore crack growth crack length CTOD tests CTOD values curve cycle defect effect fabrication ferrite fiber Figure fracture initiation fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen ICCGHAZ impact increase layup load low carbon low toughness martensite material maximum Mechanics and Arctic method niobium Offshore Mechanics offshore structures Oseberg parameters plastic plate thickness pop-in post weld heat preheat PWHT region residual stresses sampled simulated solidification cracking steel plates stiffeners stress concentration stress intensity factor submerged arc welding surface notched Table temperature tensile thermal TMCP transverse tubular joints weld metal weld toe weldability welded joints welding procedures weldments wide plate tests yield strength