Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 80
Page 210
... Tensile specimens . The dimensions of the tensile speci- mens are shown in Fig . 3. The specimen diameter at mid- -length was reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion ...
... Tensile specimens . The dimensions of the tensile speci- mens are shown in Fig . 3. The specimen diameter at mid- -length was reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion ...
Page 408
... tensile ratio , the orientation of the yielded zones will effectively approach the direction of 45 ° to the tensile axis , whereas a low strain hardening rate or a high yield to tensile ratio will produce plastic zones which have an ...
... tensile ratio , the orientation of the yielded zones will effectively approach the direction of 45 ° to the tensile axis , whereas a low strain hardening rate or a high yield to tensile ratio will produce plastic zones which have an ...
Page 499
... tensile specimen is an important measure with reference to correlation between bending and tensile critical CTODS . 13 ) Experimental considerations have been conducted on the relationship between bending critical CTODS and critical ...
... tensile specimen is an important measure with reference to correlation between bending and tensile critical CTODS . 13 ) Experimental considerations have been conducted on the relationship between bending critical CTODS and critical ...
Contents
ADVANCED COMPOSITES | 1 |
A Study of the MultiLayered GRP Composite Cylindrical Vessel | 13 |
Resistance of Composite Structures to Impact Loads | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
abrasion analysis as-welded assessment austenite axial base metal behaviour bending boron brittle fracture brittle zones CGHAZ Charpy chemical composition chord coarse grained HAZ concrete Conference on Offshore crack growth crack length CTOD tests CTOD values curve cycle defect effect fabrication ferrite fiber Figure fracture initiation fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen ICCGHAZ impact increase layup load low carbon low toughness martensite material maximum Mechanics and Arctic method niobium Offshore Mechanics offshore structures Oseberg parameters plastic plate thickness pop-in post weld heat preheat PWHT region residual stresses sampled simulated solidification cracking steel plates stiffeners stress concentration stress intensity factor submerged arc welding surface notched Table temperature tensile thermal TMCP transverse tubular joints weld metal weld toe weldability welded joints welding procedures weldments wide plate tests yield strength