Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 74
Page 279
... zone , but especially for the SMAW weldments it was difficult to hit this zone at the prescribed depth of 3 mm , and only a few SMAW specimens had the notch positioned in the coarse grained zone . The best positioning was obtained with ...
... zone , but especially for the SMAW weldments it was difficult to hit this zone at the prescribed depth of 3 mm , and only a few SMAW specimens had the notch positioned in the coarse grained zone . The best positioning was obtained with ...
Page 282
... zone without triggering a brittle fracture , fig 13 . The majority of brittle fractures were preferenti- ally initiated in the coarse grained zone close to the fusion line , fig 14. The reference steel revealed also brittle fracture ...
... zone without triggering a brittle fracture , fig 13 . The majority of brittle fractures were preferenti- ally initiated in the coarse grained zone close to the fusion line , fig 14. The reference steel revealed also brittle fracture ...
Page 522
... zone ( tp ) on CTOD value . While CTOD value changed little with to greater than 2mm or 4mm , depending on the test ... zone is constant irrespective of t . am , on the other hand , changes with to . Om at the brittle zone is more ...
... zone ( tp ) on CTOD value . While CTOD value changed little with to greater than 2mm or 4mm , depending on the test ... zone is constant irrespective of t . am , on the other hand , changes with to . Om at the brittle zone is more ...
Contents
ADVANCED COMPOSITES | 1 |
A Study of the MultiLayered GRP Composite Cylindrical Vessel | 13 |
Resistance of Composite Structures to Impact Loads | 19 |
Copyright | |
26 other sections not shown
Other editions - View all
Common terms and phrases
abrasion analysis as-welded assessment austenite axial base metal behaviour bending boron brittle fracture brittle zones CGHAZ Charpy chemical composition chord coarse grained HAZ concrete Conference on Offshore crack growth crack length CTOD tests CTOD values curve cycle defect effect fabrication ferrite fiber Figure fracture initiation fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen ICCGHAZ impact increase layup load low carbon low toughness martensite material maximum Mechanics and Arctic method niobium Offshore Mechanics offshore structures Oseberg parameters plastic plate thickness pop-in post weld heat preheat PWHT region residual stresses sampled simulated solidification cracking steel plates stiffeners stress concentration stress intensity factor submerged arc welding surface notched Table temperature tensile thermal TMCP transverse tubular joints weld metal weld toe weldability welded joints welding procedures weldments wide plate tests yield strength