Deformation and fracture mechanics of engineering materials
Updated to reflect recent developments in our understanding of deformation and fracture processes in structural materials. This completely revised reference includes new sections on isostress analysis, modulus of rupture, creep fracture micromechanicsms, and many more.
Results 1-3 of 84
(From Hull,'1 reprinted with permission from Hull, Introduction to Dislocations,
Pergamon Press, 1965.) (a) (b) FIGURE 2.22 Effect of jog height on screw
dislocation mobility, (a) Intermediate jog height QQ causes long-edge segments (
(After Heiser and Hertzberg,17 reprinted with permission of the American Society
of Mechanical Engineers.) FIGURE 4.1 8 Longitudinal and transverse sections of
swaged tungsten wire reduced by 87%. (After Peck and Thomas," reprinted ...
Delay increases with decreasing thickness in 2024-T3 aluminum alloy.40 (
Reprinted with permission from W. J. Mills and R. W. Hertzberg, Engineering
Fracture Mechanics, 1975, Pergamon Press.) environmental influences. An
example of ...
What people are saying - Write a review
LibraryThing ReviewUser Review - all4metals - LibraryThing
This is one of the best textbooks on physical metallurgy. My preference is for Dieter's book, but that is because it was the textbook for my physical metallurgy course in graduate school. Hertzberg's book is more modern. Read full review
Effects on Tensile Behavior
SLIP IN CRYSTALLINE SOLIDS
14 other sections not shown