Deformation and fracture mechanics of engineering materials
Updated to reflect recent developments in our understanding of deformation and fracture processes in structural materials. This completely revised reference includes new sections on isostress analysis, modulus of rupture, creep fracture micromechanicsms, and many more.
Results 1-3 of 37
result, initial crack growth rate readings often are abnormally low, suggesting the
existence of an erroneously high KllEAC level. These data, therefore, should be
used with extreme caution. 11.1.1 Major Variables Affecting Environment ...
From these methods, the crack growth rates resulting from a given cyclic load are
(da/ dn) and (da/ dn) when the crack is of length a, and a,, respectively. It is
important to note that the crack growth rate most often increases with increasing
13.21 and given by TV* = (13-10) where a*/b2 is the number of cycles necessary
for a crack to traverse a distance a* at a fixed rate b2. Although the average crack
growth rate within the affected region may be estimated crudely as a*/N%, the ...
What people are saying - Write a review
LibraryThing ReviewUser Review - all4metals - LibraryThing
This is one of the best textbooks on physical metallurgy. My preference is for Dieter's book, but that is because it was the textbook for my physical metallurgy course in graduate school. Hertzberg's book is more modern. Read full review
Effects on Tensile Behavior
SLIP IN CRYSTALLINE SOLIDS
14 other sections not shown