## Engineering mechanics of materialsThis book provides the students of various engineering disciplines with a clear and understandable treatment of the concepts of Mechanics of Materials or Strength of Materials. This subject is concerned with the behavior of deformable bodies when subjected to axial, torsional and flexural loads as well as combinations thereof. It is a 3rd, updated edition of the popular undergraduate level textbook useful for students of mechanical, structural, civil, aeronautical and other engineering disciplines. The book is supplied with problems and a solution manual will be available from the authors. |

### From inside the book

Results 1-3 of 82

Page 147

(3.4) where B and n are constants for a given

mechanical properties will now be stated and defined. For the sake of

completeness, these statements and definitions include those mechanical

properties that have ...

(3.4) where B and n are constants for a given

**material**. The most significantmechanical properties will now be stated and defined. For the sake of

completeness, these statements and definitions include those mechanical

properties that have ...

Page 486

Therefore, the designer may have to estimate some of the pertinent parameters,

which include such factors as service loads, service temperatures, and

properties on the basis of past experience and sound judgement. Consider, for ...

Therefore, the designer may have to estimate some of the pertinent parameters,

which include such factors as service loads, service temperatures, and

**material**properties on the basis of past experience and sound judgement. Consider, for ...

Page 620

In either case there is an abrupt change in the magnitude of the bending stress at

the junction between

assume that EB< EA, and therefore n is less than unity and by Eq. 13.24, for any ...

In either case there is an abrupt change in the magnitude of the bending stress at

the junction between

**material**A and**material**B. For purposes of discussion,assume that EB< EA, and therefore n is less than unity and by Eq. 13.24, for any ...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

Stress Strain and Their Relationships | 60 |

Stresses and Strains in Axially Loaded Members | 121 |

Torsional Stresses Strains and Rotations | 159 |

Copyright | |

14 other sections not shown

### Other editions - View all

### Common terms and phrases

absolute maximum shear aluminum angle of twist applied Assume axial force axially loaded beam shown bending cantilever beam Castigliano's second theorem column compressive constant coordinate cross section cross-sectional area cylinder deflection deformation depicted in Fig elastic curve equal equation equilibrium Euler EXAMPLE factor of safety FIGURE flexural stress FORTRAN free-body diagram function given by Eq k-ft k-in kN-m lb/ft length longitudinal material maximum in-plane shear maximum shear stress modulus of elasticity Mohr's circle neutral axis normal stress obtained perpendicular plane stress condition plot positive principal centroidal axis principal strains principal stresses radius ratio reactions Refer to Fig respect rotation shear force shear strain shown in Fig simply supported beam slope SOLUTION Solve Problem statically indeterminate steel stress concentration stress element subjected torque torsional uniform load vertical yield strength yield stress zero