Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 20
Page 353
DEVELOPMENT AND APPLICATIONS OF HSLA CAST STEELS Mechanical Engineering Department University of Kansas Lawrence , Kansas J. M. Svoboda Process Metallurgy International , Inc. Arlington Heights ... HSLA Cast Steels Voigt and J M Svoboda.
DEVELOPMENT AND APPLICATIONS OF HSLA CAST STEELS Mechanical Engineering Department University of Kansas Lawrence , Kansas J. M. Svoboda Process Metallurgy International , Inc. Arlington Heights ... HSLA Cast Steels Voigt and J M Svoboda.
Page 354
Chemical Composition of Commercial Grades of Cast HSLA Steel COMPOSITION , % 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 ... steels that rely on other alloying elements and strengthening methods to achieve high strength levels . The HSLA ...
Chemical Composition of Commercial Grades of Cast HSLA Steel COMPOSITION , % 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 ... steels that rely on other alloying elements and strengthening methods to achieve high strength levels . The HSLA ...
Page 358
grades of cast steel ; where in all cases the weldability of cast steels were the same as or better than the comparable wrought grades of material . However , much still needs to be learned about the weldability of HSLA steels ( and the ...
grades of cast steel ; where in all cases the weldability of cast steels were the same as or better than the comparable wrought grades of material . However , much still needs to be learned about the weldability of HSLA steels ( and the ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength