Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 51
Page 4
... attachment is often less than the thickness of the stressed plate , the work was then supplemented ( Gurney , 1979b ) by a further investigation to examine the relative influence both of the thickness of the attachment plate and of the ...
... attachment is often less than the thickness of the stressed plate , the work was then supplemented ( Gurney , 1979b ) by a further investigation to examine the relative influence both of the thickness of the attachment plate and of the ...
Page 6
... attachment length , or more accurately the ratio between attachment length and plate width , must be an important parameter . In any case , however , it is obvious that the reduction in fatigue strength with increasing width found in ...
... attachment length , or more accurately the ratio between attachment length and plate width , must be an important parameter . In any case , however , it is obvious that the reduction in fatigue strength with increasing width found in ...
Page 51
... attachment thickness of 25 mm and all the other test conditions . There is only a slight change between an attachment of 75 mm and one of 50 mm whilst the data for the 100 mm thick attachment are scattered between the 50 mm and 75 mm ...
... attachment thickness of 25 mm and all the other test conditions . There is only a slight change between an attachment of 75 mm and one of 50 mm whilst the data for the 100 mm thick attachment are scattered between the 50 mm and 75 mm ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength