Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 51
Page 122
... chord wall thickness greater than 32 mm . The correction factor is based purely on chord wall thickness and takes the form : Lt - ( 32 / t ) 0.75 The reduction factor is applied to the fatigue life calculated from the design curve . The ...
... chord wall thickness greater than 32 mm . The correction factor is based purely on chord wall thickness and takes the form : Lt - ( 32 / t ) 0.75 The reduction factor is applied to the fatigue life calculated from the design curve . The ...
Page 229
... chord and a brace . The brace has a ring welded to the end of it , with encircles to chord ; the whole joint is drowned in a block of resin . The analysis of the behaviour of the assembly , submitted to traditionnal loads is presented ...
... chord and a brace . The brace has a ring welded to the end of it , with encircles to chord ; the whole joint is drowned in a block of resin . The analysis of the behaviour of the assembly , submitted to traditionnal loads is presented ...
Page 236
... chord under conditions at dis- tant limits , this chord may be considered infinitely long with relation to the width of the ring and the annular space considered . Allowing for this geometry , the study on two- dimensional photoelastic ...
... chord under conditions at dis- tant limits , this chord may be considered infinitely long with relation to the width of the ring and the annular space considered . Allowing for this geometry , the study on two- dimensional photoelastic ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength