Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 73
Page 72
Compared to the V - notched specimen results the transition temperature shifts to higher temperatures and the reduction of the upper shelf level is greater for reheated than for as - deposited weld metal ( Fig . 10 ) . Since the change ...
Compared to the V - notched specimen results the transition temperature shifts to higher temperatures and the reduction of the upper shelf level is greater for reheated than for as - deposited weld metal ( Fig . 10 ) . Since the change ...
Page 302
... compared with a comparable steel deck . It also has the merit of decreasing fabrication time by replacing the conventional steel stringer and deck plate by single extrusions . The type of construction illustrated , inclusive of floor ...
... compared with a comparable steel deck . It also has the merit of decreasing fabrication time by replacing the conventional steel stringer and deck plate by single extrusions . The type of construction illustrated , inclusive of floor ...
Page 670
... compared with the predictions of tolerable loads or critical loads using the Battelle method ( 8 ) , PD6493-1980 ( 3 ) and CEGB failure route R6 rev 2 ( 5 ) . The test results of the 23 wide plates were compared with the predictions of ...
... compared with the predictions of tolerable loads or critical loads using the Battelle method ( 8 ) , PD6493-1980 ( 3 ) and CEGB failure route R6 rev 2 ( 5 ) . The test results of the 23 wide plates were compared with the predictions of ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength