Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 75
Page 311
... composition was considered unsuitable for welding this strength of steel . Only 1 Ni Consumable Development The use of the 1 % Ni 0.25 % Mo composition for achieving the required weld metal strength and toughness properties for the ...
... composition was considered unsuitable for welding this strength of steel . Only 1 Ni Consumable Development The use of the 1 % Ni 0.25 % Mo composition for achieving the required weld metal strength and toughness properties for the ...
Page 354
Chemical Composition of Commercial Grades of Cast HSLA Steel COMPOSITION , % 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 1,70-2,30 0,05-0,08 100 Figure 7. Cast HSLA steel nodes ( Armitage ,. % Mn CE = % C + 6 + % Cr + ...
Chemical Composition of Commercial Grades of Cast HSLA Steel COMPOSITION , % 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 1,20-2,00 0,03-0,07 1,70-2,30 0,05-0,08 100 Figure 7. Cast HSLA steel nodes ( Armitage ,. % Mn CE = % C + 6 + % Cr + ...
Page 513
... composition of the weld tal . Different methods of fabrication lead to different chemical composition ( table 1 ) and different arc stabilities can provide different amounts of gases picked up by the molten metal . Since the effect of ...
... composition of the weld tal . Different methods of fabrication lead to different chemical composition ( table 1 ) and different arc stabilities can provide different amounts of gases picked up by the molten metal . Since the effect of ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength