Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 71
Page 127
ABSTRACT on curve a common to The problem of the thickness effect on fatigue life has been studied using the fracture mechanics method . The nature of the thickness effect can be understood through a study on the alteration of the ...
ABSTRACT on curve a common to The problem of the thickness effect on fatigue life has been studied using the fracture mechanics method . The nature of the thickness effect can be understood through a study on the alteration of the ...
Page 668
܀ܢܐ 1.5 extension and this action is repeated for all specimens tested a J - Resistance curve is obtained . The idea can be extended if J and crack extension values obtained from specimens showing cleavage instability are plotted in ...
܀ܢܐ 1.5 extension and this action is repeated for all specimens tested a J - Resistance curve is obtained . The idea can be extended if J and crack extension values obtained from specimens showing cleavage instability are plotted in ...
Page 697
Significance of CTOD The fracture assessment based on the CTOD design curve has been used for the material toughness requirement and " fitness for purpose " evaluation of weld defects . It was stated ( 5 ) that the CTOD design curve ...
Significance of CTOD The fracture assessment based on the CTOD design curve has been used for the material toughness requirement and " fitness for purpose " evaluation of weld defects . It was stated ( 5 ) that the CTOD design curve ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |