Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 397
... fatigue crack growth rate of the materials due to sea wave and sea current was developed . The field tests of fatigue crack growth measurements using Ni - Cr - Mo - V ocean structural steels were performed in cathodic protec- tion and ...
... fatigue crack growth rate of the materials due to sea wave and sea current was developed . The field tests of fatigue crack growth measurements using Ni - Cr - Mo - V ocean structural steels were performed in cathodic protec- tion and ...
Page 403
... fracture distribusions throughout the specimen thickness which were measured at the portions of about 5 mm from the fatigue pre- crack front . The intergranular fracture distribusion of the 1150 MPa yield strength specimen demonstrates ...
... fracture distribusions throughout the specimen thickness which were measured at the portions of about 5 mm from the fatigue pre- crack front . The intergranular fracture distribusion of the 1150 MPa yield strength specimen demonstrates ...
Page 726
... fatigue reliability for the weld or for this complete class of welds . 2. FATIGUE CRACK GROWTH IN GIRTH WELDED JOINTS 2.1 Fatigue Crack Growth Prediction Model The probabilistic analysis of the uncertainties requires an accurate model of ...
... fatigue reliability for the weld or for this complete class of welds . 2. FATIGUE CRACK GROWTH IN GIRTH WELDED JOINTS 2.1 Fatigue Crack Growth Prediction Model The probabilistic analysis of the uncertainties requires an accurate model of ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength