Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 61
Page 250
Mesh Size Selection : Although there is no detailed evidence of a direct relationship between grain size and particle size in argon atomized powders , observations by Kandeil et al . ( 1980 ) , indicated that the coarse particles of Mar ...
Mesh Size Selection : Although there is no detailed evidence of a direct relationship between grain size and particle size in argon atomized powders , observations by Kandeil et al . ( 1980 ) , indicated that the coarse particles of Mar ...
Page 511
Similar behaviour can be expected if the study the influence of the type of iron powder improvement of other chacarteristics such as ( different grain sizes , densities and chemical burnoff rate , spattering , bead geometry , etc. , is ...
Similar behaviour can be expected if the study the influence of the type of iron powder improvement of other chacarteristics such as ( different grain sizes , densities and chemical burnoff rate , spattering , bead geometry , etc. , is ...
Page 676
All were notched from the original plate surface into the grain coarsened HAZ of the vertical weld . This weld was transverse to the loading axis . The wide plates contained semielliptical surface notches , nominally 12 mm deep and 125 ...
All were notched from the original plate surface into the grain coarsened HAZ of the vertical weld . This weld was transverse to the loading axis . The wide plates contained semielliptical surface notches , nominally 12 mm deep and 125 ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |