Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 72
Page 9
Most of the testing was done on plate joints : although available data for tubular joints indicated a thickness effect at least as great . Welds with improved weld toe profile showed higher fatigue strength ; however the strength ...
Most of the testing was done on plate joints : although available data for tubular joints indicated a thickness effect at least as great . Welds with improved weld toe profile showed higher fatigue strength ; however the strength ...
Page 250
( 1980 ) , indicated that the coarse particles of Mar - M200 compacts have coarser grain sizes . ... These results indicate somewhat lower flow strength for the finer mesh size at all temperatures and strain rates examined .
( 1980 ) , indicated that the coarse particles of Mar - M200 compacts have coarser grain sizes . ... These results indicate somewhat lower flow strength for the finer mesh size at all temperatures and strain rates examined .
Page 721
The crack front length L of the curved crack is supposed to be divided into a number of small Surface crack In the Non - Destructive Tests ( NDT ) , all defects are not detected , moreover even if a defect is detected the size indicated ...
The crack front length L of the curved crack is supposed to be divided into a number of small Surface crack In the Non - Destructive Tests ( NDT ) , all defects are not detected , moreover even if a defect is detected the size indicated ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |