Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 77
Page 72
Since the change in loading conditions , caused by the presence of a sharp crack instead of a blunt notch , is the same for both ... situation at blunt notches and fatigue cracks located in the two different weld metal microstructures .
Since the change in loading conditions , caused by the presence of a sharp crack instead of a blunt notch , is the same for both ... situation at blunt notches and fatigue cracks located in the two different weld metal microstructures .
Page 332
The notch toughness properties of the same microstructures were also determined by means of notched tensile tests . These tests were planned to obtain a view on the impairment of the tensile properties in the presence of a defect . . at ...
The notch toughness properties of the same microstructures were also determined by means of notched tensile tests . These tests were planned to obtain a view on the impairment of the tensile properties in the presence of a defect . . at ...
Page 650
Charpy V - notch test specimens were sampled from transverse to the rolling direction of plate at 1 / 2t and 1/4 positions in the plate thickness . Through - thickness CTOD test specimens of subsidiary size ( BXB ) were also sampled ...
Charpy V - notch test specimens were sampled from transverse to the rolling direction of plate at 1 / 2t and 1/4 positions in the plate thickness . Through - thickness CTOD test specimens of subsidiary size ( BXB ) were also sampled ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |